2020-en

Best air quality thanks to Werma CO2 traffic light

Traffic light set helps to ensure "correct" ventilation in enclosed spaces to avoid high concentrations of CO2 and aerosols in the room Given the current coronavirus pandemic, we are in an unprecedented, exceptional situation. The current situation is changing our lives in all aspects and we face new challenges every day. People's health and protection are a top priority. For this reason, the Government and companies are constantly looking for new ways to halt the global pandemic and to meet constantly changing conditions. Werma Signaltechnik is making an important contribution to this: With the new CO2 traffic light, the current carbon dioxide (CO2) concentration in the ambient air can be measured and made…

Continue ReadingBest air quality thanks to Werma CO2 traffic light

EMC-KEL-DS | Split EMC cable entry frames

For shielding cables with connectors / IP55 The cable entry frame EMC-KEL-DS has been metallised (galvanise coated) to create a conductive surface. The front cable grommet (KT) is used for strain relief and cable sealing on the cable jacket. The cable shield is contacted over 360° via the rear conductive grommet (EMC-KT). The EMC-KEL-DS frames match exactly the cut-out dimensions for 24-pin standard industrial connectors. Either a cut-out of 36 mm or 46 mm in height can be chosen depending on the cables being routed. The contact between the EMC-KEL-DS and the conductive housing wall is realised via the included conductive flat gasket. Specifications IP rating (certified acc. to EN 60529): IP54, IP55Material: Polyamide,…

Continue ReadingEMC-KEL-DS | Split EMC cable entry frames

FIEPOS – IP54, IP65 and IP67 field power supplies

The decentralized FIEPOS power supplies with high protection classes IP54, IP65 or IP67 were developed for flexible use directly in the field. 300W or 500WFor 1-phase or 3-phase systems IP54, IP65 or IP67Reliable protection against dust and water Eco-friendly design Current-limited outputsSelective power distribution and protection LED interfaceImmediate diagnosis in the field Decentralization.Field power supplies. The need for flexible, modular systems shapes machine and system engineering. Decentralization of the system components has proven to be an important factor for success. It speeds up system planning, simplifies maintenance and enables an easy expansion of the system. In addition, control cabinets can be replaced by smaller versions or even completely dismantled. With FIEPOS, short for…

Continue ReadingFIEPOS – IP54, IP65 and IP67 field power supplies

Bringing power to your installation has never been easier!

Automation and equipment need a lot of power. As installation concepts become more sophisticated, the number of field devices is increasing, and components such as IO modules, sensors, drives, cameras & lighting are being used everywhere. The influences of Industry 4.0 and IIoT are leading to increased demand for process control and feedback.  Even mechanics are evolving from pneumatic to electric propulsion increasing demand for power in the field.  Simple solutions are needed to bring energy to power hungry applications, an easy achievement with Murrelektronik’s standardized power connectors. What makes Murrelektronik power connectors the right solution? Compact assemblies with high energy capacityPre-assembled connectors, 100% tested to eliminate wiring errors.Industry Standard connectors, coded to…

Continue ReadingBringing power to your installation has never been easier!

Customized Sensors Solutions

Adapting the sensor to the application In many cases, off-the-shelf sensors do the job without problems. However, the advent of Industry 4.0 and the demand for bespoke or single-batch production bring with them an increasing need for customized sensor solutions. Modifications range from minor changes to the wiring, housing or electronics to completely new functional principles. Depending on the application, completely different approaches may be needed, calling for substantial experience in the development of special solutions. Modern sensor technology makes it possible to measure hugely diverse parameters in mechanical and equipment engineering. Traditional sensors cope with many measuring tasks without any problems, but increasingly, some applications such as wind-power plants or safety equipment…

Continue ReadingCustomized Sensors Solutions

New panel mount jacks with fibre optic and M12 connections

According to bitkom, more than half of all industrial companies already use a fibre optic connection. To also cover this field, Schlegel has developed a first panel mount jack for the LC connection type. The panel mount jack RRJ_LWL_LC_OM2 is designed for LC/LC coupling and complies with the standards IEC 61754-20 and EN 50377-7. Up to 500 mating cycles and the use within a temperature range from -40°C to 75°C are possible. The mounting depth is only 28.5 mm. Additional connection and fibre types are planned and can be requested directly from Schlegel. Schlegel also further expands its product range in the area of M12 connection technology with the new M12 panel mount…

Continue ReadingNew panel mount jacks with fibre optic and M12 connections

Puls power supply data for the new EPLAN Data Standard

As one of the first manufacturers, Puls already provides the data for its latest DIN rail power supplies in the new standard. The optimized data standard is intended to standardize the component data available in the EPLAN Data Portal. Consistently high data quality facilitates the design of a digital twin of the cabinet and helps to automate CAE processes. For example, cable lengths can be calculated automatically, the reliable total weight of the control cabinet can be determined, or complete BOMs can be exported. Puls supports these innovations from the beginning and offers exact macros, detailed 3D files and connection diagrams for its latest DIN rail power supplies, such as PIM90.241, QT40.241-B2 and…

Continue ReadingPuls power supply data for the new EPLAN Data Standard

Cube67 Diagnostics Gateway – Diagnostics Made Easy

Murrelektronik's Cube fieldbus system offers extensive diagnostic options. A new diagnostics gateway makes access to this data even easier. This solution is easy to implement, provides clear information in case of failure and speeds up troubleshooting, resulting in maximum availability of machines and systems. The Cube system from Murrelektronik is a high-performance, decentralized fieldbus system that is used in many machines and systems. It has a modular structure and customized installation concepts can be realized with a large variety of input modules, output modules, mixed modules, and a wide range of function modules (e.g. IO-Link, RS 485, etc.). A one cable system transfers both communication data and supply voltages, whereby up to 32…

Continue ReadingCube67 Diagnostics Gateway – Diagnostics Made Easy

LFC – EMC Shield connection for use with cable clamps on 30 mm DIN rail shape C

With the LFC cable shield clamp the cable shield is directly contacted at the C-rail. Your existing cable clamp can still be used for strain relief. The shield clamps SKL / MSKL are easy to use and effective in earthing single cable shields. Advantages Space-saving assembly, no tools required High vibration resistance Large clamping range from 3 to 30 mm Large shielding contact area Shield contact and strain relief separated For mounting on all standard C-rails (16-17 mm) Specifications Shield clamp type: Single clamp No. of shield clamps: 1 × (M)SKL Material shield clamp: Spring steel, zinc plated Material mounting foot: Spring steel Mounting type: Snap-in Mounting location: 30 mm DIN rail shape…

Continue ReadingLFC – EMC Shield connection for use with cable clamps on 30 mm DIN rail shape C

Crowd Management with SignalSET system

A new simple crowd management wireless traffic light system The Corona pandemic has placed us all in an exceptional situation. Our everyday life has been changed in so many different ways and we have to face new challenges on a daily basis. The highest priority has to be the health and safety of the population. Both government and companies are looking at all possible ways to control the spread of the virus. Werma is able to make an important contribution with the launch of the traffic light system SignalSET. This system provides the control of access to supermarkets and shops, dentist and doctor’s surgeries, for example, and thus enables compliance with local “social…

Continue ReadingCrowd Management with SignalSET system

ACTIVSTONE – Revolutionary triple protection

Inductive sensors with weld spatter-resistant ceramic coating The Weld-Immune range of inductive sensors now includes ceramic-coated types. In addition to mechanical shock resistance and immunity to the magnetic fields of welding equipment, the new sensors are characterized by a robust, weld spatter-resistant coating. This coating increases the service life of sensors, facilitates cleaning and helps to reduce machine downtime. Inductive sensors from Contrinex’s Weld-Immune range with ACTIVSTONE ™ coating now offer the highest level of weld spatter resistance. A high-performance ceramic material forms a durable, non-stick coating on all external surfaces of the sensor, including the fixing nuts. The coating material has been specially formulated for robustness and resists impacts and abrasion without…

Continue ReadingACTIVSTONE – Revolutionary triple protection

Signal technology with USB

Werma offers clever solutions that simply work In many manufacturing and process applications it is necessary to indicate machine status/faults/warnings by means of signal lights/beacons/traffic light systems. Machines and equipment are not always PLC controlled and therefore there are many instances where the application has to be monitored and controlled by PC. Typical applications include call centres, automatic check-out systems or for monitoring data produced by lab equipment. The optimum solution here is Werma’s LED 816 Multicolour beacon or the terminal elements with USB interface for signal towers from the KombiSIGN 71 and 72 families. Wide ranging options without a separate power supply These innovative solutions from Werma are controlled directly from the…

Continue ReadingSignal technology with USB

NEW and INNOVATIVE: The CMS-10R with 4G, SMS, IoT functionality and much more

‘All-in’ CMS-10R ComatReleco Messaging System Wireless remote monitoring and control systemFor use in 4G, 3G, 2G mobile networksBuilt-in eSIM technology for worldwide useNo separate contract is necessary with a mobile providerDevice communication via web browser – iot.comatreleco.comPush notification via Android or iOS apps, e-mail and SMSConfigurable inputs and outputsGuaranteed alert in the event of blackout on site Overview Digital and analog inputs: Three device types are available, with different inputs - AC 110…240 V, DC 12…48 V, DC 0…10 V, DC 4…20 mA Plug and Play: Wireless programming via the internet with PC, smart phone or tablet App and E-Mail, additionally SMS:  You will be alerted by push notification and remote control is…

Continue ReadingNEW and INNOVATIVE: The CMS-10R with 4G, SMS, IoT functionality and much more

EMC cable entry systems

Solutions for conducted and field-bound disturbances In case of conducted as well as field bound EMI disturbances, our split cable entry system EMC-KEL and our split cable gland EMC-KVT-DS offer an effective way to divert and block those disturbances and provides an alternative to conventional EMC cable glands - especially when routing cables with connectors. The industrial process technology demands increasing security against disturbances for electrical MCR facilities (measure, control, regulate). Special emphasis is being placed on the derivation of electromagnetic interference. A distinction is made between conductive and field-bound disturbances. A large contact area of the cable shield for the derivation of the interference to a conductive enclosure wall combined with the shielding of the enclosure interior, generally…

Continue ReadingEMC cable entry systems

A Perfect System to Monitor Current

Mico Pro is Murrelektronik's innovative 24 VDC current monitoring system. The modular design makes it possible to create systems that fit the application perfectly – which adds value by creating a cost–benefit ratio that saves space in the control cabinet. Murrelektronik's patented tripping behavior ensures maximum machine availability. An additional advantage is the integrated potential distribution concept. It significantly reduces the control cabinet wiring. Power supply systems are the heart of machines and systems because they provide the energy required for operation. Overcurrent or short circuits can impact the power supply and cause machine downtime, production downtime and high costs. In order to maximize the reliability of the power supply systems, these problems…

Continue ReadingA Perfect System to Monitor Current

Safety light curtain with Bluetooth LE

Configure and monitor safety devices using smartphone app YBES light curtains include a Bluetooth-LE interface for remote, wireless configuration and real-time communication of status or diagnostic data to a smartphone or tablet. In addition to extended functionality (EDM, restart interlock, beam coding, etc.) and ease of use, operators benefit from reduced installation costs as safety relays are no longer required. YBES light curtains meet the highest Type 4 safety requirements of Category 4, PL e and Safety Integrity Level SIL 3. They offer blind-zone free mounting and an integrated alignment system. The new safety systems will be available for use from 2020. To prevent unauthorized access to hazardous areas, automated systems often rely…

Continue ReadingSafety light curtain with Bluetooth LE

Compact 36W, 60W and 90W DIN rail power supplies with basic functionality

The latest and smallest representatives of the PIANO product family are currently the 24V DIN rail power supplies PIM36 (36W - coming soon), PIM60 (60W) and PIM90 (90W). Mini power supplies. New space opportunities. The new PIANO Mini (PIM) power supplies create space in your systems or machines and allow you a more flexible planning. A 90W DIN rail power supply in a 36x90x91mm (WxHxD) housing is currently unique in the market. The width of the 36W version is only 22.5mm - so literally a thumb's width. This results in completely new space opportunities for you. Focus on core features. The most important characteristic of the PIANO devices is their focus on the…

Continue ReadingCompact 36W, 60W and 90W DIN rail power supplies with basic functionality