UB40.241 – DC-UPS control unit

24V, 40A for battery sizes from 12Ah to 200Ah Technical data DC Input voltage: DC 24V (± 25%)Int. current consumption (incl. charging current): 3.2 / 6.2ANominal voltage: 24VdcOutput current: 40AOutput power: 960WDerating: 24W/°C for +50 to +70°CStorage element: External lead acid batteryAllowed battery size: 12Ah - 200AhTemperature tracking of the end-of-charge voltage: automatically with temp. sensorDimensions (WxHxD): 46mm x 124mm x 127mmWeight per unit (excl. packaging): 530gMounting method: DIN railOperating temperature range: -25°C to 70°CConnection method: Screw terminals Features 1-Battery-Concept - Each 12V battery is charged and monitored separately for longest battery life, matching of batteries not necessaryOutput is decoupled from the input to separate load circuits into buffered and non-buffered sectionsAllows VRLA…

Continue ReadingUB40.241 – DC-UPS control unit

KEL-FA split multi cable entry frames

for cables with connectors, tool-free assembly / IP54 The KEL-FA range is a compact system to route and seal pre-terminated cables as well as conduits or pneumatic hoses utilising KT series grommets. After populating the entry frame with grommets and cables, the cover is put on and the two clamping levers are locked with the lower part by pressing them down. The twist-proof construction of the KEL-FA enables intuitive assembly. Routing and sealing with IP54 for cable diameters from 1 to 35 mm. The KEL-FA frames match exactly the cut-out dimensions for 10-, 16- and 24-pin standard industrial connectors. These KEL-FA frames can either be screw mounted or simply snapped into the KEL-SNAP frame. Specifications IP rating (EN 60529):…

Continue ReadingKEL-FA split multi cable entry frames

Multi-membrane cable entry plates for cables without connectors

KEL-DPZ multi-membrane cable entry plates, round, with metric threads M25 - M63 / IP66 / IP68 / UL Type 12/4X* KEL-DPZ round cable entry plates are designed to route and seal cables without connectors or fibre optics (from 1.5 mm to 22 mm in diameter) in limited space. The assembly of the KEL-DPZ round with cables or pneumatic hoses can be done quick and easy. Simply make a small hole in the thin membrane, push the cables through. The KEL-DPZ round provides strain relief and protection IP66 / IP68 / UL Type 4X*. The round versions of the KEL-DPZ series have a thread to fit in metric cut-outs from M25 to M63. Thus…

Continue ReadingMulti-membrane cable entry plates for cables without connectors

Pilot light with 7 colours

It is made in the RONTRON-R-JUWEL design and includes a RGB-SMD LED. Besides the option to choose between 7 colours, the illumination uniformity and the depth of colour have become even more homogeneous and intense. The standard colours are white, red, green, blue, yellow, magenta and cyan, but it is possible to access the whole RGB colour range, using a PWM signal (pulse width modulation). The pilot light is easily connected via the SMD flat clamp, just inserting the cable. The clamp ensures the connection and keeps the cable in place. A safety diode protects the LED against damage in case of improper connection of the cable. The new RGB pilot light is…

Continue ReadingPilot light with 7 colours

Cable pass-through with brush seal

icotek offers cable pass-through solutions with brush seal like brush plates and brush strips that are perfectly suitable for applications where no high sealing rate is required. The icotek brush seal solutions are meant for dust and dirt-proof cable pass-through of lines with or without preassembled connectors. All brush cable pass-through products KEL-BES-S split brush plate for cable pass-through Split brush plates KEL-BES-S for routing cables into server racks, control panels and electrical enclosures. KEL-BES-S is also an ideal solution for entry and exit of cables that are routed inside raised floors, e.g. in computer centres. The brush plates can either be mounted via screws or via expanding rivets. Due to the split…

Continue ReadingCable pass-through with brush seal

eSIGN – a new dimension of signalling

The new benchmark for industrial signalling The new eSIGN signal tower is a breakthrough and a clear sign of Werma's continual technological progress: this signal tower sets new standards in terms of individuality and flexibility with full-surface signalling, robust industrial design and impressive features. Simply the best signal tower ever! eSIGN – a visible sign of continual progress As early as 1994, Werma established a global industry standard with the launch of their KombiSIGN signal tower. And this standard has just been upgraded: the eSIGN is the next generation that will define the future of signal towers. Impressive features, supreme compatibility and an industrial design that combines functionality with style and durability. The new…

Continue ReadingeSIGN – a new dimension of signalling
Read more about the article KVT-W90 split 90° cable gland
KVT-W90 - icotek - Varga Elektronik d.o.o.

KVT-W90 split 90° cable gland

for cables with connectors, M32/M50 / IP54 The split KVT-W90 cable glands are used to insert and seal pre-terminated cables at a 90° angle. But also electric, pneumatic or hydraulic lines without terminals or connectors as well as corrugated conduits can be easily routed (e.g. into control panels, enclosures or machinery) and sealed with IP54. In particular, the KVT 50-W90 is perfectly suited to hold corrugated or smooth hoses. A large number of cable entry grommets is available to the user. By using multi-hole grommets up to 16 lines can be routed with one cable gland. Polyamide standard locknuts as well as a sealing ring are included in the shipment. Split locknuts can…

Continue ReadingKVT-W90 split 90° cable gland

Vision Installation Solutions from Murrelektronik

The Power of Vision Industrial image processing is a real efficiency booster for many industries. Cameras replace a large number of sensors and are the basis for maximum automation of numerous processes. Barcode reading, dimensional inspection, quality control, parts tracking and identification, and production line monitoring are just a few of the applications. Automation and optimization equal greater efficiency, higher throughput, increased quality, fewer reworks and, last but not least, improved customer satisfaction. Plug and Play Murrelektronik has developed efficient and economical system solutions for integrating industrial image processing systems. The advantages include minimal installation effort as a result of decentralized, pluggable modules that can be mounted directly on the machine. This achieves…

Continue ReadingVision Installation Solutions from Murrelektronik

Making Great Sensors Even Better – New M12M and M18M Metal-Bodied Photoelectric Sensors are Tougher and More Versatile

Equipped with Contrinex’s exclusive ASIC technology and featuring IO-Link connectivity, these robust devices take tough environments in their stride You’ll love these tough new additions to our tried-and-tested standard photoelectric range, introducing M12M and M18M metal-cased sensors that reinforce its highly regarded M18P plastic-bodied series. Featuring the same exclusive ASIC technology as their plastic-bodied counterparts, M12M and M18M devices are available in diffuse, reflex, through-beam and background-suppression (M18M only) variants, offering best-in-class sensing distances at highly competitive prices. With Ecolab approval, M18P photoelectric sensors are already a popular choice for process engineers in the food and beverage sector. The new M12M and M18M devices not only deliver the same proven sensing capability and…

Continue ReadingMaking Great Sensors Even Better – New M12M and M18M Metal-Bodied Photoelectric Sensors are Tougher and More Versatile

icotek Service boxes

KT ServiceBox Part No.: 88001 Cable grommets, small: 110× KT for cables 1 - 17 mm10× BTK blank grommets10× KTMB multi - range grommets2× KT - DPF mutli - range grommets8× KT - ASI for ASI - Bus cables Cable grommets, large: 25× KT for cables 16 - 35 mm4× Blank / adapter grommets  3× KTMB multi - range grommets2× DT multi - membrane grommets   2× KT - DPF multi - range grommets Accessories: 2× KEL - U 10 cable entry frames1× KVT split cable gland  1× KZL strain relief plate1× Cable template QT ServiceBox Part No.: 88005 Cable grommets: 210× QT for cables 1 - 15 mm10× QTB blank grommets Accessories: 5×…

Continue Readingicotek Service boxes

CONFiX™ FWS bulkhead fittings for cable protection conduits

suitable for conduit screw connections or direct conduit pickup / IP54 The 90° angled conduit fitting CONFiX™ FWS is for installation of parallel corrugated cable protection conduits, e.g. in machines, control panels or control cabinets. The liftable cover is tightly fixed by a hinge. Therefore, the system is fast and easy to install. CONFiX™ FWS is offered in the following versions: CONFiX™ FWS-A with metric internal thread M16 to M50CONFiX™ FWS-B with a grooved conduit clip for types with sizes NW 13, 17, 23, 29, 37 and 50 The available colours are grey (RAL 7011) and black (RAL 9001). Specifications IP rating (EN 60529): IP54Material:: PolycarbonateFlame class: UL94-V0, self-extinguishingOperating temperature: -30 C° to…

Continue ReadingCONFiX™ FWS bulkhead fittings for cable protection conduits

PISA-B – The next generation of electronic circuit breakers

The all new PISA-B multi-channel electronic circuit breakers help you to optimize the availability of your DC 24V systems right away and grow with your application. Protect Inform Secure Assist Selective tripping of overloaded channels In the event of a fault, PISA-B disconnects the affected channels only and ensures constant power supply to the remaining loads. This means individual faulty connections can be rapidly identified, isolated and rectified. Two different output types PISA-B features two types of output channels. Channel 1 and 2 are ideal for high capacitive loads up to 100mF and allow peak currents up to 12 A. Standard loads with up to 20mF can be connected to channels 3 to…

Continue ReadingPISA-B – The next generation of electronic circuit breakers

KEL-DPU-HD hygienic multi-membrane cable entry plates

The new cable entry plates KEL-DPU-HD have been specially developed for installation in food processing and packaging machines. During the development according to the Hygienic Design guidelines, care was taken to ensure that the visible side of the cable entry plate are free of dirt-collecting recesses. The surface was kept very smooth (Ra = 0,421 μm acc. to ISO 4287). The outer contour has a radius of 6 mm instead of the required 3 mm. In addition, the KEL-DPU-HD uses an FDA-compliant elastomer in accordance with food approval 1935/2004/EG and (EU) 10/2011. The signal colour blue ensures a clear visual colour recognition.  KEL-DPU-HD entry plates are designed to route and seal cables without connectors…

Continue ReadingKEL-DPU-HD hygienic multi-membrane cable entry plates

Robust and safe: Schlegel emergency-stop switches

In dangerous situations, emergency-stop switches can protect from serious injuries or even safe life. Schlegel emergency-stops convince customers in the whole world: Mechanical robustness, outstanding functionality and safety as well as the attractive design are good arguments for using our emergency-stop switches. Our switches are TÜV certified and available in different shapes, dimensions and suitable for our standard and AS-Interface contact blocks. Emergency-stops with illuminated status indication active/inactive In order to avoid the mixing up of active and inactive emergency-stops it was necessary until recently to lock away or cover the inactive emergency-stop to make it unrecognisable as soon as the relating operating panel or plant part was no longer connected to the…

Continue ReadingRobust and safe: Schlegel emergency-stop switches

IMAS-CONNECT™

Adapter grommets for Keystone jacks, PushPull connectivity and circular connectors By utilising the modular adapter system, the cable entry frame becomes a hybrid system. Pre-terminated and standard cables or hoses can be routed and at the same time the system serves as an interface for connectors.The new modular adapter system IMAS-CONNECT™ is a modular designed grommet system for mounting circular connectors, Keystone jacks, hose fittings, pressure compensation elements and much more.The grommets, made of elastomer with a polyamide body, fit perfectly into the split icotek cable entry frames, like KEL-U, KEL-ER, KEL-FG and KEL-QUICK and meet the protection classes IP54 to IP65 / IP66, depending on the grommet type. Order your free sample!…

Continue ReadingIMAS-CONNECT™

Strain relief acc. to EN 62444 for a secure cable management

ZL strain relief plates The strain relief plate ZL is used for static or dynamic applications for organising and securing cables on machines, control panels or drag chains. The design of the strain relief unit provides secure strain relief according to EN 62444. Mount of the cables or pneumatic tubing is easily done using cable ties. By using aluminium (ZL-AB types) or brass (ZL-MS types) nuts for the screw holes, a better fit of the strain relief plate is achieved, even in high vibration environments. Strain relief plates ZL 03 | 04 | 05 feature different comb widths. Thus providing a multi-purpose product for various cable sizes. For multilayer installation please use DH…

Continue ReadingStrain relief acc. to EN 62444 for a secure cable management

Picostat pressure switch – 9R5

The 9R5 of the Picostat series is based on our long lasting experience in the railway sector. The new Picostat generation with improved performance and new design meets the demanding requirements of rail vehicle applications. Main features Stainless steel housingStainless steel bellow sensor, weldedCompact designRugged housingMeets EN 50155 (Railway) Technical Data Product code: 9R5Designation: Picostat Railway pressure switchMeasuring principle: Steel bellow weldedApplications: RailwayApproval / conformity: EN 50155 (Railway), EN 45545-2 (Fire protection), EN 61373 (Shock, vibration), EN 60730-1/ EN 60730-2-6: type 2.B.HOutput signal: 1 Floating change-over contact (SPDT)Electrical connections: EN 175301-803-A (DIN 43650-A)Media temperature: –40°C ... +85°CAmbient temperature: –40°C ... +85°C (EN 50155: OT6) Datasheet Flyer

Continue ReadingPicostat pressure switch – 9R5

CONFiX™ cable conduit system

CONFiX™ FWS bulkhead fittings - for cable protection conduits Suitable for conduit screw connections or direct conduit pickup / IP54 The 90° angled conduit fitting CONFiX™ FWS is for installation of parallel corrugated cable protection conduits, e.g. in machines, control panels or control cabinets. The liftable cover is tightly fixed by a hinge. Therefore, the system is fast and easy to install. The available colours are grey (RAL 7011) and black (RAL 9001). CONFiX™ FWS is offered in the following versions: CONFiX™ FWS-A with metric internal thread M16 to M50CONFiX™ FWS-B with a grooved conduit clip for types with sizes NW 13, 17, 23, 29, 37 and 50 Specifications IP rating (EN 60529):…

Continue ReadingCONFiX™ cable conduit system

Stainless steel enclosures

Practical stainless steel enclosures with special design features Industrial enclosures in 1.4301/A2 and 1.4404/A4 stainless steel Rolec stainless steel enclosures are rated IP66 and IP67 and have many useful design features. These include the tried and tested single-channel technology from our aluminium enclosures. This is positioned outside of the enclosure interior and used for combined wall mounting and fitting the lid (A2 models). For the A4 models, separate fastening and lid channels are used, again outside of the enclosure interior. The injected silicone gaskets and fastening brackets on the bottom also offer real benefits. These innovative stainless steel enclosures are available in both 1.4301/A2 and 1.4404/A4 grade material. Ideal for use in the pharmaceutical sector, process technology and anything in the maritime area. The A4 grade enclosures…

Continue ReadingStainless steel enclosures