For shielding cables with connectors / IP55
The EMC cable entry frame EMC-KEL-DS has been metallised (galvanise coated) to create a conductive surface.
The front cable grommet (KT) is used for strain relief and cable sealing on the cable jacket. The cable shield is contacted over 360° via the rear conductive grommet (EMC-KT).
The EMC-KEL-DS frames match exactly the cut-out dimensions for 24-pin standard industrial connectors. Either a cut-out of 36 mm or 46 mm in height can be chosen depending on the cables being routed.
The contact between the EMC-KEL-DS and the conductive housing wall is realised via the included conductive flat gasket.
Specifications
- IP rating (certified acc. to EN 60529): IP54, IP55
- Material: Polyamide, highly conductive coating
- Flame class: UL94-V0, self-extinguishing
- Operating temperature: -40 C° to 140 C°
- Mounting options: Screw type mounting
Advantages & benefits
- Both conducted and field-bound disturbances can be reliably diverted
- Strain relief and sealing are separated from the EMC contact
- Scratch-resistant surface
- Contacting the cable shield over 360°
- EMC grommets made entirely from conductive elastomer
- Very good dissipation values
- Very good shielding effect with regard to EMC tightness
Product types & sizes
EMC-KEL-DS 24|10
| Part No. | 99410 |
| For max. no. of cables | 10 |
| Max. cable diameter | 17 mm |
| Length x Width x Height | 147 x 58 x 40 mm |
| Mounting height | 40 mm |
| Cut-out size | 112 x 36 mm |
| No. of screw holes | 4 |
| Diam. of screw holes | 5.8 mm |
| Screw material | Mild steel, galvanically zinc plated |
| Suitable for grommets | 10 x EMC-KT small 10 x KT small |
EMC-KEL-DS 24|7
| Part No. | 99411 |
| For max. no. of cables | 7 |
| Max. cable diameter | 35 mm |
| Length x Width x Height | 147 x 58 x 40 mm |
| Mounting height | 40 mm |
| Cut-out size | 112 x 36 mm |
| No. of screw holes | 4 |
| Diam. of screw holes | 5.8 mm |
| Screw material | Mild steel, galvanically zinc plated |
| Suitable for grommets | 6 x KT small 1 x KT large |
EMC-KEL-DS 24|4
| Part No. | 99412 |
| For max. no. of cables | 4 |
| Max. cable diameter | 35 mm |
| Length x Width x Height | 147 x 58 x 40 mm |
| Mounting height | 40 mm |
| Cut-out size | 112 x 36 mm |
| No. of screw holes | 4 |
| Diam. of screw holes | 5.8 mm |
| Screw material | Mild steel, galvanically zinc plated |
| Suitable for grommets | 2 x KT small 2 x KT large |
