icotek TOOLS – Hydraulic punch drivers and rail cutter

icotek offers a small-sized hand hydraulic punch driver which allows quick and easy punching of rectangular, square and round holes. The holes fit exactly the cut-out dimensions of most icotek cable entry systems. When you have to punch several holes, this hand hydraulic punch driver is much faster than any manual wrench-style punches.

Punch driver sets

Advantages & benefits

  • Maximum flexibility due to 360° head rotation
  • Compact, lightweight aluminum design (2 kg) for fast and easy operation
  • High hydraulic force (60 kN, 600 bar) for easy punching
  • Robust plastic storage case
  • Punch driver also suitable for punches by other manufacturers

Hand hydraulic punch driver

The compact, lightweight hand hydraulic punch driver makes it easy to punch holes into stainless V2A steel, mild steel, aluminium or plastics with a max. sheet thickness of 3 mm (V2A: 2 mm), due to its high hydraulic force. The cylinder of the punch driver rotates 360° on 3 axles, so maximum flexibility even in hard-to-reach places is provided.

The punch driver can be used with all icotek punches and also with punches of other manufacturers.

Scope of delivery:
  • 1 hand hydraulic punch driver (weight: 2 kg)
  • 1 draw stud ∅ 9.5 mm (3/8″ UNF) to ∅ 19 mm (3/4″ UNF), L: 105 mm
  • 1 draw stud ∅ 19 mm (3/4″ UNF), L: 130 mm
  • 1 spacer
  • 1 tube lubricant
  • 1 HSS co-pilot drill (multi step drill)
  • 1 robust plastic storage case
  • Set PRO 16-31: 1 each knockout punch M16 | M20 | M25 | M32
  • Set PRO 16-63: 1 each knockout punch M16 | M20 | M25 | M32 | M40 | M50 | M63

Hydraulic foot pump

Universally applicable single-stage foot pump with a fixed operating pressure of 450 bar and built-in pressure relief valve. Suitable for all icotek round punches, rectangular and square punches. Keeps your hands free to position the sheet metal punch precisely, especially when using larger sheet metal punches.

Scope of delivery:
  • 1 foot pump
  • 2,5 m high pressure hose including quick coupling
  • 1 hydraulic cylinder for holding round and rectangular punch
  • 1 draw stud for rectangular punch, Order No. 80209
  • 1 draw stud for round punch (steel) M16 – M25, Order No. 80200
  • 1 multi-step drill, Order No. 80204
  • 1 spacer, Order No. 80202
  • 1 tube lubricant, Order No. 80203

Rectangular & square punches

sized for heavy multi-pin industrial connectors and icotek cable entry systems

Rectangular and square punches and dies make it easy to punch holes into stainless steel (V2A versions), mild steel, aluminium or plastics with a max. sheet thickness of 2 mm. Available for cut-outs sizes of 10-, 16-, and 24- multi-pin heavy industrial connectors and also for numerous special cut-outs. Therefore, the punches are suitable for most icotek cable entry systems. Centre punches are integrated in the die for exact drilling of mounting holes.

The punches are for hydraulic operation only.

Scope of delivery:
  • Punch, die and draw stud
  • Robust plastic storage case
Advantages & benefits:
  • Centre punches for exact drilling of mounting holes
  • Robust plastic storage case
  • Suitable for hand hydraulic punch driver by icotek and other manufacturers
Cut-out size:
  • 112 x 46 mm
  • 112 x 36 mm
  • 112 x 24 mm
  • 86 x 36 mm
  • 86 x 24 mm
  • 66 x 112 mm
  • 65 x 36 mm
  • 65 x 24 mm
  • 52 x 36 mm
  • 43 x 24 mm
  • 22 x 45 mm
  • 125 x 125 mm
  • 92 x 92 mm
  • 68 x 68 mm
  • 46 x 46 mm

Round punches

for cut-outs of cable glands and round cable entry plates

Self-centering knockout punches for stainless steel (V2A versions), mild steel, aluminium and plastic walls with max. sheet thickness of 3 mm (V2A: max. 2 mm). Punches available for cut-outs PG 16, M16, M20, M25, M32, M40, M50, M63, M75 and M85. Cut-outs for icotek split cable glands and round cable entry plates can be punched.

The special cutting geometry of the punch reduces the cutting pressure and therefore the required effort. The punch splits slugs into several pieces (type related)* for easy slug removal. For installation of round switches icotek offers a PG 16 punch with an integrated 3 mm twist protection notch.

The punches are designed for manual and hydraulic operation.

Scope of delivery:
  • Punch and die (without draw stud)
Advantages & benefits:
  • Multiple splitting punches for easier slug removal/ for easy punching
  • Suitable for hand hydraulic punch driver by icotek and other manufacturers
Cut-out size:
  • M16, 16.2mm
  • M20, 20.4 mm
  • M25, 25.4 mm
  • M32, 32.5 mm
  • M40, 40.5 mm
  • M50, 50.5 mm
  • M63, 63.5 mm
  • M75, 75.5 mm
  • PG 16, 22.5 mm

DIN-RC 2 rail cutter

for DIN rails & bus bars, with length stop 1000 mm

The DIN-RC 2 cutter cuts various DIN rails effortlessly and accurately. The cut is clean and free of burrs; there is no waste.

The length stop with guiding device ensures that nothing slips while cutting and that the cut is always 90° at an exact angle. Thanks to the optimal power transmission of the cutting device, only little effort is required.

The DIN-RC 2 is suitable for cutting
  • DIN rails 35 x 7.5 mm
  • DIN rails 35 x 15 mm
  • DIN rails 15 x 5.5 mm
  • Bus bars 10 x 3 mm
Advantages & benefits:
  • Cuts the most common DIN rails 35 x 7.5 mm, 35 x 15 mm and 15 x 5.5 mm as well as bus bars 10 x 3 mm
  • Exact 90° cuts
  • Burr-free cuts
  • With length stop 1000 mm and guiding device
  • Hand lever actuation with little effort
icotek TOOLS – webpage

Related Posts