Read more about the article Implementation of the Environmental management system ISO 14001
Varga Elektronik - ISO 14001

Implementation of the Environmental management system ISO 14001

According to the companies drive for sustained progress and improvement of services, we decided to implement the environmental management system ISO 14001. After a positive experience during the implementation of the ISO 9001 system, we put our trust again in the certification company TQV Adria which helped us with all the aspects during the implementation of both systems, ISO 9001 and ISO 14001. Thanks to the tireless team within the company all the tasks were completed in a record amount of time. Invested time, effort and financial resources invested in the preparation and implementation of the system have been confirmed by the certificate issued. With this certificate we have proved that the system…

Continue ReadingImplementation of the Environmental management system ISO 14001
Read more about the article Efficient redundancy through MOSFET technology

Efficient redundancy through MOSFET technology

The new and extremely space-saving DIN rail MOSFET redundancy modules from Puls are now available for N+1 and 1+1 redundant systems. Available output voltages include: 12–18V for 2x20A and 2x40A redundancy and 24-56V for 2x20A redundancy.A unique feature of the YR40.245 module adds a Hot-Swappable connector which enables the power supply or redundancy module to be exchanged even during operation. The Puls MOSFET redundancy modules are extremely energy efficient with only 1.7W no-load losses at nominal load and symmetrical current distribution in redundancy mode (max. 2.9W). A special emphasis has also been placed on a very low voltage drop between input and output, which lies between 49mV and 80mV for 1+1 redundancy operation…

Continue ReadingEfficient redundancy through MOSFET technology
Read more about the article Compact Emergency-Stop Switch

Compact Emergency-Stop Switch

Compact Emergency-Stop Switch - Very compact Emergency-Stop Switch for Ø16,2 mm holes Installation diameter of Ø16,2 mm Emergency-Stop function in accordance with DIN EN ISO 13850/DIN EN 60947-5-5 Flat connection 2,8x0,5 mm With switch position indication Foolproof Protection level IP65/67 Can be illuminated Possible configurations up to: 2 NO and 1 NC contacts

Continue ReadingCompact Emergency-Stop Switch
Read more about the article Hand hydraulic punch drivers & knockout punches

Hand hydraulic punch drivers & knockout punches

icotek now offers a small-sized hand hydraulic punch driver without hose which allows quick and easy punching of rectangular, square or round holes. The holes fit exactly the cut-out dimensions of most icotek cable entry systems. When you have to punch several holes, this hand hydraulic punch driver is much faster than manual wrench-style punches. Hand hydraulic punch driver Due to its high hydraulic force the compact, lightweight hand hydraulic punch driver makes it easy to punch holes into mild steel, aluminium or plastics with a max. sheet thickness of 3 mm. The cylinder of the punch driver rotates 360° on 3 axles. Therefore, maximum flexibility even in hard-to-reach places is provided. We…

Continue ReadingHand hydraulic punch drivers & knockout punches
Read more about the article New extra loud vocal elements with individual record/playback

New extra loud vocal elements with individual record/playback

The two new vocal elements types 154 and 190 developed by Werma Signaltechnik give high volume output together with exceptionally good tone quality. Up to 110dB sound output is possible in both units meaning that the audible warning can be heard, even in the loudest of ambient noise environments It is possible to record virtually any audible content – your own message/announcement, tunes or tones can be imported into the two units from either Mp3 or WAV formats. In this way the most specific instructions or announcements can be recorded and played back. Simple to follow recording instructions The vocal element is connected to a PC via USB and the software supplied with…

Continue ReadingNew extra loud vocal elements with individual record/playback
Read more about the article Miniature pressure transmitter NAE 8256

Miniature pressure transmitter NAE 8256

The new miniature pressure transmitter NAE 8256 is a unique solution on the basis of HEX19 combined with ship approvals offering an accuracy of up to ±0.3 % and extraordinary robustness and reliability. Bubikon, September 2015 – The heart of the new pressure transmitter NAE 8256 is Trafag’s very robust and extraordinary stable thin-film-on-steel sensing element which remains accurate and reliable even under rough conditions due to the triple overpressure safety and the fully welded design. The electronics are based on the inhouse designed ASIC, an application specific microchip which achieves optimal temperature compensation and linearization of the measurement over the wide operating temperature range of -40 … 125°C. The combination of the HEX19…

Continue ReadingMiniature pressure transmitter NAE 8256
Read more about the article Steca PF 166 and Steca PF 240: the most efficient energy-saving refrigerators

Steca PF 166 and Steca PF 240: the most efficient energy-saving refrigerators

Steca PF 240 and Steca PF 166, the most efficient energy-saving refrigerators for all DC applications Steca PF refrigerators are the most efficient DC energy-saving refrigerators ever developed. They can be used as either a refrigerator or a freezer. Steca PF 166 and Steca PF 240 are fully programmable. The inside temperature and each of the other configuration values can be set by the user. They are therefore perfectly suited for all DC applications including even the refrigeration of medicines in hospitals. The optimal electronic control and speed regulation of the compressor guarantees extremely efficient use of energy. This leads to significant cost reductions. This product stands out for its user-friendliness, thanks to…

Continue ReadingSteca PF 166 and Steca PF 240: the most efficient energy-saving refrigerators
Read more about the article Implementation of the Quality Management System ISO 9001
Varga Elektronik - ISO 9001

Implementation of the Quality Management System ISO 9001

With great pride and joy we bring you this news that on the 25th of September 2015 we brought the project of implementation of the Quality Management System 9001:2008 to an end. Thanks to the hard work of the entire company during the past 12 months and the consultant we were successful in the process of implementation of the ISO Quality Management System. Invested time, hard work and financial resources put in the preparation and implementation of the system resulted with the issuance of a certificate by TQV. With the certificate we proved that the system is successfully implemented. Our clients, business partners and other members of the market can now be assured…

Continue ReadingImplementation of the Quality Management System ISO 9001
Read more about the article MICO modules approved for NEC Class 2

MICO modules approved for NEC Class 2

Murrelektronik's MICO protective modules for UL508A control cabinets are a proven solution for intelligent power distribution and efficient branch circuit’s protection. 8 different MICO modules are now NEC Class 2 approved, so you can efficiently design your power distribution scheme. Class 2 Circuits are circuits with limited energy and a maximum power of 100 VA. According to the NEC & UL definition, class 2 circuits limit the risk of electrical fires and electric shocks due to their limited energy. Therefore, according to UL508A standard (for control cabinets), any component used and attached devices on the branch circuit in a Class 2 circuit don’t require investigation. So far, an individual NEC Class 2 approved…

Continue ReadingMICO modules approved for NEC Class 2
Read more about the article EMC cable clamps

EMC cable clamps

For process measurement and control equipment an increasingly higher level of protection against failure is required. EMI shielding and earthing is very important. The area where the cable shield is connected to the cabinet earth is a critical point. It is very important that the connection has a low resistance.All icotek EMC cable clamps for shielding cable diameters from 1.5 to 29 mm have been tested utilising various frequency ranges and in all tests there was minimal leakage resistance. In large frequency fields, the cable clamps provide low resistance. Effective range is up to 1,000 MHz below 120 Ohms and 10 kHz to 100 MHz significant below 20 Ohms. icotek EMC cable clamps…

Continue ReadingEMC cable clamps
Read more about the article The C23 Full Inox Extreme series of inductive full-metal sensors – flat, rugged, efficient

The C23 Full Inox Extreme series of inductive full-metal sensors – flat, rugged, efficient

The new C23 Full Inox series of flat, full-metal inductive sensors is ideal for applica-tions where the environment is harsh and space is scarce, but long operating distanc-es are still indispensable. Thanks to Contrinex ASIC technology, these miniature-sized sensors are highly accurate and include an IO-Link interface. C23 Full Inox Extreme sensors offer the advantage of factor of 1 on steel and aluminium. Compared with similar sensors, they are distinguished not only by their IO-Link interface but also by better quality, a longer service life, greater resilience and, last but not least, by their excellent price-performance ratio. With this sensor's embeddable all-metal housing in stainless steel, applications do not need to pull any…

Continue ReadingThe C23 Full Inox Extreme series of inductive full-metal sensors – flat, rugged, efficient
Read more about the article Motors – We Make Them Easy to Connect

Motors – We Make Them Easy to Connect

Murrelektronik's new power connectors (M12, M15 and M23) make motors easy to connect. The M12 power connector is the most compact and powerful 5 pole M12 connector on the market. The new M15 power standard connection technology of the MQ15-X-Power connector enables extremely quick assembly. Murrelektronik's M23 connectors are an established standard solution to connect servo motors. Perfect contacts, seal and media resistance are basic requirements to all connector types. The field of motor connections requires additional, special features. Wide connection cross sections, high performance in a very compact design and most important: an integrated anti-vibration locking mechanism that makes sure the connector is tight even with very strong vibrations. Murrelektronik offers power…

Continue ReadingMotors – We Make Them Easy to Connect
Read more about the article Rolec profiPLUS – agile support arm with a way pointing variability

Rolec profiPLUS – agile support arm with a way pointing variability

Designed for universal applications in electrical engineering and industrial electronics, profiPLUS is compatible with all display/control panels from leading manufacturers. The ergonomic, stable ball joints form the turn and crucial point of the system. These include right angle connectors, wall-, intermediate- and top joints, which build a solid connection between the carrying arm and if applicable a foot. The cable routing is made "invisible" by special wrappings in all turn- and tilt couplings. The uncluttered and elegant appearance plays less a crucial role as the fact, that the cables are optimal protected from outside influences. The dimensions of all components are generously sized for the cables and connectors. This also simplifies the connection…

Continue ReadingRolec profiPLUS – agile support arm with a way pointing variability
Read more about the article Murrelektronik Emparro® 3~ Premium Power

Murrelektronik Emparro® 3~ Premium Power

Murrelektronik's Emparro family has a new member. The newly developed Emparro 3-phase power supplies for 24V applications are important components in quality power management systems. These units are not only extremely reliable but also extraordinarily efficient as a result of their integrated reserved power. However, they don't require much space in the cabinet. This is premium power from Murrelektronik! Extremely Reliable Reliable power supplies are an essential component to ensure maximum availability of machines and systems.  Therefore, reliability wasa high priority during development of these new 3-phase units. Their remarkably high MTBF value of about 1,000,000 hours shows this clearly. Achieving this MTBF is possible because of our high-quality components, the modern and…

Continue ReadingMurrelektronik Emparro® 3~ Premium Power
Read more about the article Comat – The motor controllers of the CMC series

Comat – The motor controllers of the CMC series

CONTROL UNIT FOR DC MOTORS AND SOLENOID VALVES New, with even more performance: revised version with even higher output current of 16 A (CMC1) and/or 10 A (CMC15/16)Equipped with a wear free and short-circuit protected solid state outputSafe control of inductive loads of utilisation category DC-13 up to 16 AAdjustable start and breaking rampsIncreases the lifecycle of the entire system, prevent mechanical shocks and current peaksStepless speed control of DC motors via a 0 – 10 V- or 4 – 20 mA signalSpace saving: only 14 mm wide The motor controllers of the CMC series enable a zero-wear actuation of brush DC motors or of DC-solenoid valves. Depending on the wiring, the CMC…

Continue ReadingComat – The motor controllers of the CMC series
Read more about the article Werma ClearSIGN compact

Werma ClearSIGN compact

The complete Signal Tower Solution The new ClearSIGN signal tower combines a slim unobtrusive design with cutting edge lighting technology and great functionality. Signalling technology has moved significantly forward in a most logical manner. The homogenous light effect is particularly impressive and when a light is activated comes to life in a unique form. ClearSIGN uses purely LEDs which help create an unobtrusive minimalistic design with a high level of functionality. Using the latest electronic lighting controls, signal tower elements are illuminated to a previously unseen brightness and create a uniquely fluid illumination effect. If no status light is required, the signal tower stands elegantly in the background, appearing to be virtually invisible,…

Continue ReadingWerma ClearSIGN compact
Read more about the article icotek KEL-E i MT

icotek KEL-E i MT

KEL 16-E Product descriptionThe cable entry frame KEL 16-E, from icotek, offers a larger frame size for routeing a greater amount of cables, pipes or conduits. The KEL 16-E series are KEL frames extended with an additional middle frame for routeing additional cables. Thus allowing a quick, easy and cost effective routeing solution for up to 48 cables. Advantages Protection class IP54Warranty of pre-terminated cables remainsRetrofitting and maintenance can be carried out easily and quickly High packing density, wide variety of frames and insertsStrain relief according to EN 50262 / 62444Vibration-proofKEL also available with V2A screwsKEL on request also available with threaded bushings Accessories KT Cable insertsKEL-EMC Cable collector KEL 16-MT Product descriptionThe cable entry frame KEL…

Continue Readingicotek KEL-E i MT
Read more about the article Murrelektronik Xtreme series – Extreme Conditions. Easy Installations.

Murrelektronik Xtreme series – Extreme Conditions. Easy Installations.

Parched fields with swirling dust. Icy streets treated with salt. Wet soil where harvesters fight the mud and dirt. All are demanding environments where heavy equipment has to deal with a variety of conditions. Products used in mobile applications are exposed to wide temperature fluctuations and UV light. They are pelted by dust, treated with high pressure water (IP66K) and cleaners (IP69K) and sometimes they are even immersed (IP68). They have to withstand vibration and oils. In short, they have to meet the most extreme requirements. To this point, single wire connections have been used in the construction of heavy equipment. This means many individual parts (cables, cable ties, ferrule ends) have to…

Continue ReadingMurrelektronik Xtreme series – Extreme Conditions. Easy Installations.

Rolec inoCASE

Rolec has a proud history as a market leader in the design and development of new concepts in enclosures, command enclosures and suspension systems. The company founders Friedhelm and Matthias Rose are pioneers in enclosures technology. Providing our customers with fully matured designs of the highest quality and value is our prime objective. Today Rolec manufactures an extensive range of modern high performance enclosures typically rated from IP 66 to IP 67. The range includes die cast and extruded aluminium enclosures, GRP polyester enclosures and ABS or polycarbonate plastic enclosures. Naturally top products have to go together with top customer service. This includes the human factor - meaning a friendly environment - and first class service. The ready for installation customising of…

Continue ReadingRolec inoCASE
Read more about the article Puls PIANO – Reliable DIN-Rail Power Supplies for Mid-Market Applications

Puls PIANO – Reliable DIN-Rail Power Supplies for Mid-Market Applications

We now extend our product range to new market segments. Applying new concepts from design to manufacturing, the PIANO series offers reliability, service life-time and efficiency figures usually available only in more expensive products. The Mean Time Between Failure (MTBF) figures of the Puls PIANO-Series are as high as 1.5 million hours and the minimum service life-time is typically 40,000 hours. Efficiency figures vary, depending on the version, from 90.5% up to 94.5%. The 240W version consumes a width of only 49mm on the DIN-Rail, therefore it offers the same size benefit as the newest and most costly products from other vendors. Robust even for demanding applications, these purely convection cooled units can…

Continue ReadingPuls PIANO – Reliable DIN-Rail Power Supplies for Mid-Market Applications