PISA-B – The next generation of electronic circuit breakers

The all new PISA-B multi-channel electronic circuit breakers help you to optimize the availability of your DC 24V systems right away and grow with your application. Protect Inform Secure Assist Selective tripping of overloaded channels In the event of a fault, PISA-B disconnects the affected channels only and ensures constant power supply to the remaining loads. This means individual faulty connections can be rapidly identified, isolated and rectified. Two different output types PISA-B features two types of output channels. Channel 1 and 2 are ideal for high capacitive loads up to 100mF and allow peak currents up to 12 A. Standard loads with up to 20mF can be connected to channels 3 to…

Continue ReadingPISA-B – The next generation of electronic circuit breakers

KEL-DPU-HD hygienic multi-membrane cable entry plates

The new cable entry plates KEL-DPU-HD have been specially developed for installation in food processing and packaging machines. During the development according to the Hygienic Design guidelines, care was taken to ensure that the visible side of the cable entry plate are free of dirt-collecting recesses. The surface was kept very smooth (Ra = 0,421 μm acc. to ISO 4287). The outer contour has a radius of 6 mm instead of the required 3 mm. In addition, the KEL-DPU-HD uses an FDA-compliant elastomer in accordance with food approval 1935/2004/EG and (EU) 10/2011. The signal colour blue ensures a clear visual colour recognition.  KEL-DPU-HD entry plates are designed to route and seal cables without connectors…

Continue ReadingKEL-DPU-HD hygienic multi-membrane cable entry plates

Robust and safe: Schlegel emergency-stop switches

In dangerous situations, emergency-stop switches can protect from serious injuries or even safe life. Schlegel emergency-stops convince customers in the whole world: Mechanical robustness, outstanding functionality and safety as well as the attractive design are good arguments for using our emergency-stop switches. Our switches are TÜV certified and available in different shapes, dimensions and suitable for our standard and AS-Interface contact blocks. Emergency-stops with illuminated status indication active/inactive In order to avoid the mixing up of active and inactive emergency-stops it was necessary until recently to lock away or cover the inactive emergency-stop to make it unrecognisable as soon as the relating operating panel or plant part was no longer connected to the…

Continue ReadingRobust and safe: Schlegel emergency-stop switches

IMAS-CONNECT™

Adapter grommets for Keystone jacks, PushPull connectivity and circular connectors By utilising the modular adapter system, the cable entry frame becomes a hybrid system. Pre-terminated and standard cables or hoses can be routed and at the same time the system serves as an interface for connectors.The new modular adapter system IMAS-CONNECT™ is a modular designed grommet system for mounting circular connectors, Keystone jacks, hose fittings, pressure compensation elements and much more.The grommets, made of elastomer with a polyamide body, fit perfectly into the split icotek cable entry frames, like KEL-U, KEL-ER, KEL-FG and KEL-QUICK and meet the protection classes IP54 to IP65 / IP66, depending on the grommet type. Order your free sample!…

Continue ReadingIMAS-CONNECT™

Strain relief acc. to EN 62444 for a secure cable management

ZL strain relief plates The strain relief plate ZL is used for static or dynamic applications for organising and securing cables on machines, control panels or drag chains. The design of the strain relief unit provides secure strain relief according to EN 62444. Mount of the cables or pneumatic tubing is easily done using cable ties. By using aluminium (ZL-AB types) or brass (ZL-MS types) nuts for the screw holes, a better fit of the strain relief plate is achieved, even in high vibration environments. Strain relief plates ZL 03 | 04 | 05 feature different comb widths. Thus providing a multi-purpose product for various cable sizes. For multilayer installation please use DH…

Continue ReadingStrain relief acc. to EN 62444 for a secure cable management

Picostat pressure switch – 9R5

The 9R5 of the Picostat series is based on our long lasting experience in the railway sector. The new Picostat generation with improved performance and new design meets the demanding requirements of rail vehicle applications. Main features Stainless steel housingStainless steel bellow sensor, weldedCompact designRugged housingMeets EN 50155 (Railway) Technical Data Product code: 9R5Designation: Picostat Railway pressure switchMeasuring principle: Steel bellow weldedApplications: RailwayApproval / conformity: EN 50155 (Railway), EN 45545-2 (Fire protection), EN 61373 (Shock, vibration), EN 60730-1/ EN 60730-2-6: type 2.B.HOutput signal: 1 Floating change-over contact (SPDT)Electrical connections: EN 175301-803-A (DIN 43650-A)Media temperature: –40°C ... +85°CAmbient temperature: –40°C ... +85°C (EN 50155: OT6) Datasheet Flyer

Continue ReadingPicostat pressure switch – 9R5

CONFiX™ cable conduit system

CONFiX™ FWS bulkhead fittings - for cable protection conduits Suitable for conduit screw connections or direct conduit pickup / IP54 The 90° angled conduit fitting CONFiX™ FWS is for installation of parallel corrugated cable protection conduits, e.g. in machines, control panels or control cabinets. The liftable cover is tightly fixed by a hinge. Therefore, the system is fast and easy to install. The available colours are grey (RAL 7011) and black (RAL 9001). CONFiX™ FWS is offered in the following versions: CONFiX™ FWS-A with metric internal thread M16 to M50CONFiX™ FWS-B with a grooved conduit clip for types with sizes NW 13, 17, 23, 29, 37 and 50 Specifications IP rating (EN 60529):…

Continue ReadingCONFiX™ cable conduit system

Stainless steel enclosures

Practical stainless steel enclosures with special design features Industrial enclosures in 1.4301/A2 and 1.4404/A4 stainless steel Rolec stainless steel enclosures are rated IP66 and IP67 and have many useful design features. These include the tried and tested single-channel technology from our aluminium enclosures. This is positioned outside of the enclosure interior and used for combined wall mounting and fitting the lid (A2 models). For the A4 models, separate fastening and lid channels are used, again outside of the enclosure interior. The injected silicone gaskets and fastening brackets on the bottom also offer real benefits. These innovative stainless steel enclosures are available in both 1.4301/A2 and 1.4404/A4 grade material. Ideal for use in the pharmaceutical sector, process technology and anything in the maritime area. The A4 grade enclosures…

Continue ReadingStainless steel enclosures

Cable management & EMC cable shield earthing for control panels, enclosures and cabinets

Control panel construction is required in numerous areas: Building technology, electrical engineering, industrial automation, power distribution, network technology, telecommunications... In these areas, electrical engineers are confronted with deadlines and cost pressure. High demands are placed on individual control panel solutions, short production time and high quality at low costs. icotek offers highly efficient and cost-effective solutions for every control panel application in the fields of cable feed-through, cable management and EMC cable shielding. Split cable entry systems and cable glands by icotek enable a fast, safe and cost-effective way to feed several preassembled cables (e.g. circular M connectors, Profibus, D-Sub, multi-pin power plugs...) through control panel, cabinet or enclosure walls, bases or roofs without…

Continue ReadingCable management & EMC cable shield earthing for control panels, enclosures and cabinets

KDR-ESR gland plates with slide frames

for Rittal, nVent Hoffman & Häwa enclosures / IP54 The KDR-ESR is a one-piece plate to be assembled on enclosure bases. Slide frames for the KEL-U cable entry frames are already pre-assembled. On some gland plate types KEL-JUMBO cable entry frames can be mounted as well. After installing all cables into the KEL-U frames, they are easily and quickly inserted into the slide frames and fixed. During maintenance, the KEL-U frames are removed without tools from the slide frames. Due to the combination KDR-ESR and KEL-U cable entry frames, a rating of IP54 is achieved (with correct selection of cable grommets). Slide frames which are no longer required, are closed with BPK-SNAP blank…

Continue ReadingKDR-ESR gland plates with slide frames

Multi-Mode Smart Sensors Deliver Cost-Effective Condition-Based Monitoring in Rotating Equipment

Customer Values Embeddable Smart Sensors monitor multiple parameters including deflection, vibration, temperature, linear position, angular displacement and cycle countA single sensor variant provides a range of functions in different locations on a piece of machineryIndustry-standard IO-Link connectivity provides a single interface to the machine control systemDual-channel operation allows the sensor to deliver high-speed notifications directly to the control system if a critical failure occursCumulative operating data, including temperature profile and operating-cycle count, is recorded in on-board data storageSensor configurations are stored locally, allowing plug-and-play replacement of sensors when neededSmart Sensors are ideal for remote locations as proven technology ensures highly reliable fit-and-forget operation with no day-to-day intervention Specific Product Advantages Robust, metal-cased Smart…

Continue ReadingMulti-Mode Smart Sensors Deliver Cost-Effective Condition-Based Monitoring in Rotating Equipment

EMC shield clamps on earthing tapes

with or without integrated cable fixing function The earthing tapes are fitted with a shield clamp at one end. This solution is used where space is limited. The earthing tapes are available with M4 or M6 holes. Specifications Material: Shield clamp: Spring steel, zinc plated / Base frame: Cu-ETPProperties: vibration proofMounting options: Screw type mounting,Riveting Advantages & benefits Very flexible assemblyInstallation even in places that are difficult to accessEarthing tapes with pressed-on connecting end padsStandard products, short delivery times UL listed Order your free sample! Download PDF MB|MSKLMB|Z-MSKL Product nameNo. of shield clampsFor max. no. of cablesHole sizeCross-sectionCurrent loadLength x Width x HeightPUPart No.MB|100|6|M4|MSKL 3-1211M46 mm²67 - 80 A113 x 14,9 x 25 mm10…

Continue ReadingEMC shield clamps on earthing tapes

AndonWIRELESS

The new WERMA AndonWIRELESS call for action system is the quick and easy way to report, display and rectify problems in a targeted manner. Have you been mainly been solving faults and problems by shouting or walking around? Using AndonWIRELESS, you can now report them professionally at the push of a button. The wireless connection between the buttons and signal towers makes installation easier and faster than ever before, saving you time and money. Every button (Andon WirelessBOX) can be operated using mains power or battery power. This allows you to use it as a stand-alone system for mobile applications, e.g. on forklifts or tugger trains. Keep your operation future-proof and flexible for greater efficiency…

Continue ReadingAndonWIRELESS

MICO – Solutions for Intelligent Power Distribution

Complex power supply systems with many components require reliable load protection. Switch mode power supplies are the core of these systems since they electronically monitor output voltage and output current. If there is a short circuit or an overload, protective devices downstream (for example circuit breakers) react slower than the power supply and do not ensure selectivity. This can cause critical situations like voltage drops or even cable fires.Our compact MICO modules help eliminate these problems: MICO is an essential component for protecting power supply systems! Target-oriented protection is a big challenge for modern power supply systems. MICO is an intelligent power distribution system that meets this challenge! Errors are found quickly while…

Continue ReadingMICO – Solutions for Intelligent Power Distribution

KEL-DPF pyramid cable entry grommets

for single cables with diameters up to 70 mm, M25 - M85 / IP66 / IP68 / UL Type 12/4X The KEL-DPF was developed particularly for routing large or unknown sizes of cables into a switch cabinet or machine (max. cable diameter 70 mm). Due to the flexibility and unique pyramid shape, cable entry and flexible positioning is much easier compared to using conventional cable glands. Also perfect for bundling or restraining large cables. Cutting of DPF grommets: Cable diameter less 25%. The corresponding diameters are marked on the grommet. It is recommended that additional strain relief be provided for cables using cable ties. For mounting the KEL-DPF sizes 75 and 85 we…

Continue ReadingKEL-DPF pyramid cable entry grommets

KEL-SNAP mounting frames

for tool-free snap-in mounting of cable entry frames / IP54 / UL Type 12 The patented KEL-SNAP frame provides a quick snap-in assembly of the KEL / KEL-U / KEL-QUICK / KEL-FG-A cable entry systems. Control panels, cabinets or machines can be equipped with the KEL-SNAP frame at delivery, allowing a simple push in of the KEL frame when routing the cables and conduits. Perfect for enclosures that are maintenance intensive or for an install at a later date. icotek is also offering the snap-in frame as splittable version KEL-SNAP-S in various sizes that makes a subsequent assembly possible. There's also a blank plate BPK-SNAP available to close cut-outs of pre-assembled KEL-SNAP frames. Specifications…

Continue ReadingKEL-SNAP mounting frames

New 480W power supply for marine applications

The 24V, 20A DIN rail power supply CP20.245-R2 was developed for on- and offshore use in the marine and process industry. The marine-compliant power supply meets the high requirements of EMC class B without external filters and can be used directly in bridge and deck applications. The CP20.245-R2 features the perfect electronical and mechanical design for the rough environmental conditions at sea and on the coast. The power supply is characterized by its high immunity to transients and voltage peaks as well as its robust aluminum housing. The device provides the full output power of 480W even with fluctuating ambient temperatures between -40°C and + 60°C. The extensive approval package includes Marine DNV,…

Continue ReadingNew 480W power supply for marine applications

KEL-SCDP multi-range cable entry grommets

pluggable, for single cables with diameters up to 36 mm / IP65 With the KEL-SCDP cable entry grommet, single cables, hoses, and conduits can be routed and sealed at a rating of IP65. Its unique advantage is the large sealing range. The single circular membrane can be peeled away to accommodate the specific diameter of the cable or hose. For this purpose, only a small hole between the rings needs to be pierced. Then the corresponding ring can be removed. The peeled-off area is always round, ensuring a secure seal around cable/hose. Another advantage is the high mounting flexibility. The KEL-SCDP can simply be plugged into cut-outs with wall thicknesses from 1.5 to…

Continue ReadingKEL-SCDP multi-range cable entry grommets

RFID Extreme

The Extreme family of metal, low-frequency components is particularly suitable for use in harsh environments, such as the steel industry, agriculture and other outdoor applications. It comprises stainless-steel (V2A / AISI 304) passive tags and threaded RWMs that utilize proprietary LF data communication (31.25 kHz). All components are insensitive to dirt and designed for outstanding performance in metallic environments. If the ContriNET protocol is used, these LF components can share one network with HF types, including the full range of interfaces. LF Extreme tags are readable/writable through metal and available in diameters of 10 mm, 16 mm, 26 mm, M16 and M30. Mounting is fully embeddable, including in metal, and maximum read/write distances…

Continue ReadingRFID Extreme

Smart strain relief and EMC shielding on the C-rail

EMC shield clamps for 30 mm DIN rail shape C with or without integrated strain relief EMC shield clamps are used, where the shield of cables must be connected to the earth potential. They are easy to use and effective in earthing single cable shields. When using types with integrated strain relief cables can be fixed via the cable jacket using cable ties. Thus strain relief in accordance with EN 62444 is achieved. We also offer EMC shield clamps with double strain relief function acc. to PROFINET installation guidelines. Due to its special design the clamping ranges of the MSKL are very large while the dimensions are comparatively small. (Example: MSKL 3-12, assembled…

Continue ReadingSmart strain relief and EMC shielding on the C-rail