NewsE – Page 2 of 8 – Varga Elektronik

CP5 series: Wide range of new 120W DIN rail power supplies

Post author:Varga Elektronik
Post published:27. August 2019.
Post category:2019 / Puls

In the 120W power class, the new CP5.121 (12V, 10A) and CP5.241 (24V, 5A) power supplies are setting new benchmarks. With a width of just 32mm and a reduced depth of 102mm, this is the most compact DIN rail power supply in this performance class. The lifetime of the 24V version is 166,000 hours* and the 12V version achieves a minimum of 110,000 hours – in both cases under extreme conditions of 230Vac, continuous full load and +40°C ambient temperature. Advanced topology These high values are achieved using an LLC resonance converter. This advanced converter topology is atypical for a 120W power supply. The result sets a…

The new multicolour 240 series LED Installation Beacon

Post author:Varga Elektronik
Post published:7. August 2019.
Post category:2019 / Werma

Compact installation beacon with up to seven colours With its new 240 series LED Installation Beacon Multicolour, Werma now offers a compact signal device with up to seven colours in a single beacon: red, yellow, green, white, blue, violet und turquoise. A tricolour version is available as an alternative, combining the most common colours, red, yellow and green in just the one beacon. The beacon can be actuated via either a simple cable connection or a pre-assembled M12 plug – for plug & play. This allows you to signal several different statuses with just one device! The beacon can also…

QT-DT – Membrane cable grommets

Post author:Varga Elektronik
Post published:30. July 2019.
Post category:2019 / icotek

The QT-DT cable grommets can be used anywhere where a large number of electrical, pneumatic or hydraulic lines must be routed and sealed with IP54. By using the QT-DT grommets, the cable density can be significantly increased. QT-DT grommets are compatible with split icotek cable entry frames KEL-QUICK and KEL-QTA. The routing of cables with and without preassembled connectors in one cable entry frame can thus be easily combined. The QT-DT grommets are also perfectly suitable for the assembly of subsequently terminated cable harnesses. Advantages Combination of routing pre-terminated and standard cables with one cable entry frameEnables sub-assembly of cable…

It continues… 2G becomes 4G

Post author:Varga Elektronik
Post published:17. July 2019.
Post category:2019 / Comat Releco

Do you still use 2G SMS Relay in your systems today? Get additional discounts from Q3 2019 when purchasing a 4G SMS Relay!This offer applies to all 2G SMS relays CMS-10 from the mentioned manufacture years and is valid until 31.12.2020. Manufacture year of the 2G SMS relayAdditional discount on the new 4G SMS relay201830%201725%201615% App instead of SMS: You will be alerted via PUSH-messages and the remote control is via app. The communication via SMS can optionally be disabled.Plug and play: Wireless programming over the internet using PC, smartphone or tablet.Wiring: The pin assignment remains the same.Easy exchange: Transfer the configuration of 2G…

Video on DPC 8380 and DPS 8381

Post author:Varga Elektronik
Post published:8. July 2019.
Post category:2019 / Trafag

The DPC 8380 and the DPC 8381 are the ideal combination of pressure switch and transmitter with pressure display. The parameters are set on the device or in a timesaving way via an NFC - smartphone App. The settings in combination with a comprehensive set of options make the DPX 838x suitable for a wide range of industrial applications. In this new video the advantages of the pressure switches with display DPC 8380 and DPS 8381 are shown: Quick and easy parametrisation via smartphone and appFlexible installation and fittingAnalysis of the pressure profileConvenient storage https://youtu.be/FwaY21M1hVE?list=PLOqXlZntPE-QAtCgj0Gr1nDpfKyPcXsKw

Pressure resistant up to 500 bar (7255 PSI)

Post author:Varga Elektronik
Post published:26. June 2019.
Post category:2019 / Contrinex

Robust inductive sensors with IO-Link for Industry 4.0 applications Contrinex’s High Pressure range of inductive sensors now features an optional IO-Link interface in PNP NO versions at no extra charge. This enables sensing applications in high-pressure environments to benefit from the control and monitoring functions of Industry 4.0 implementations. At the same time, maintenance costs can be reduced and system availability increased.For inductive sensing in high-pressure environments, a long service life at high operating and peak pressures is essential. Contrinex therefore uses particularly robust technology for its high-pressure resistant Extra Distance and Full Inox models. These sensors operate reliably over…

Werma expands StockSAVER with “Place-by-light” function

Post author:Varga Elektronik
Post published:10. June 2019.
Post category:2019 / Werma

At LogiMAT 2019 in Stuttgart, Werma Signaltechnik presented a clever extension for StockSAVER – which monitors the fill level of FIFO flow racks and automatically triggers replenishment of the materials, as required. With the new optional "Place-by-light" function, replenishment errors can now be eliminated, since the storage bay that needs new materials is clearly indicated. StockSAVER – the third generation Kanban There are already many users who can confirm the benefits of Werma’s StockSAVER. This clever retrofit system uses reporting points in the FIFO flow rack to give full transparency in production logistics. Sensors determine the number of material containers…

Industrial PoE+ injectors

Post author:Varga Elektronik
Post published:29. May 2019.
Post category:2019 / Puls

The 4- or 8-channel solutions are available with an integrated Puls high-end power supply or as standalone PoE injectors. Both devices feature a stable power of up to 30W per channel. This enables you to supply up to 8 PoE/PoE+ devices with only one injector.The all-in-one device with an included AC/DC converter adds some extra benefits. It can be connected directly to the AC mains, permitting a simplified system structure. Previously at least two devices were needed to achieve this result.The underlying trusted power supply CP10.481 provides an outstanding efficiency of 95.5%. That means less power losses and results in…

Murrelektronik Cloud – Using Data to Your Advantage

Post author:Varga Elektronik
Post published:17. May 2019.
Post category:2019 / Murrelektronik

The Murrelektronik Cloud is here and it’s ideal for using machine and plant data smartly. Murrelektronik’s nexogate device is your interface to the industrial field. A lot of people in a company can benefit from process data including the management, maintenance, programmers and service personnel… Data is used for different purposes such as adapting production, adjusting scheduling and organizing maintenance work.The Murrelektronik Cloud keeps users up-to-date with the precise information they need. Data can be accessed online via a dashboard from any mobile device, anywhere, any time. You can also define the type of information sent to teams in advance.…

Cable entry plates KEL-DPZ 16

Post author:Varga Elektronik
Post published:2. May 2019.
Post category:2019 / icotek

icotek KEL-DPZ 16 cable entry plates are designed to route and seal up to 34 cables without connectors or fibre optics (from 1.5 mm to 16.2 mm in diameter) in limited space.The KEL-DPZ products are a cost and time saving alternative to traditional cable glands.The assembly of the cable entry KEL-DPZ 16 with cables or pneumatic hoses can be done quick and easy. Simply make a small hole in the thin membrane, push the cables through. The KEL-DPZ 16 provides strain relief and protection up to IP66.The size KEL-DPZ 16 matches exactly the cut-out dimensions of 16-pin standard industrial connectors.ST-B…

We opened a new production hall

Post author:Varga Elektronik
Post published:26. April 2019.
Post category:2019 / Varga Elektronik

Since its inception the company Varga Elektronik to this day, we were guided by the pronouncement of the inventor Thomas Edison that success is 1% luck and 99% hard work. The basis for our overall business is based on these foundations.The company started work in 2005 with only one employee in a garage of a family home and a representation of 6 reputable companies for industrial electronics. After one year, we started cooperation with the Swiss company ETA SA, a member of the world-renowned SWATCH GROUP. Initially, cooperation was based on the production of empty electrical cabinets. Today, after 13…

Full Inox Chip-Immune inductive sensors

Post author:Varga Elektronik
Post published:16. April 2019.
Post category:2019 / Contrinex

New inductive sensors for metal machining processes Contrinex announces a new series of Chip-Immune sensors with NPN polarity to complement the existing range of PNP types. As a result, this sensor family is ready not only for metal-machining systems with positive logic (sink current; PNP) but also those with negative logic (source current; NPN). Machines for turning, milling, drilling or grinding metal will inevitably generate abrasion debris. For inductive sensors, which by their nature detect metal objects, this debris presents a difficult challenge. When sensors are covered with lubricant containing metal chips, there is a risk that they will supply…

Participation at the 22nd International Spring Bjelovar Fair

Post author:Varga Elektronik
Post published:4. April 2019.
Post category:2019 / Varga Elektronik

The 22nd International Spring Fair in Bjelovar and the 4th Wood-world Fair were held this weekend at the fairground in Gudovac. On the largest exhibition space so far, domestic and also international exhibitors presented their companies and products. With a total of 465, this was the largest number of exhibitors so far.Our company also presented on the fair with various products of the companies we represent. Special attention draw our latest mobile hybrid solar system. We also held a prize contest for all visitors, and shared valuable prizes. Below you can find few pictures of the fair.

The first DIN rail power supplywith an integrated IO-Link port

Post author:Varga Elektronik
Post published:11. March 2019.
Post category:2019 / Puls

The power supply is placed at a central nodal point in the system. There is more than just current flowing. A power supply records a significant amount of real-time information that is of particular interest to the operating firm as well as the system manufacturer. This data can help increase system availability and reduce maintenance and operating costs. This means the power supply has the potential – in parallel with its function as a converter – to also act as a sensor and therefore make a significant contribution to the Industrial Internet of Things (IIoT). The DIMENSION QT40.241-B2 sees PULS…

MEASURING AND MONITORING with the Comat Releco family of measuring devices

Post author:Varga Elektronik
Post published:27. February 2019.
Post category:2019 / Comat Releco

Energy measurement’ is a buzzword today, and a key concern of many professional institutions. That’s fully understandable – because the benefits from the data obtained make a considerable contribution to optimising systems and resources. A precise energy measuring device records and documents energy needs. Targeted initiatives can optimise network loads and decrease operating costs.Current and voltage monitoring relays are being used not only to protect systems and persons, but also in process management. Comat Releco measuring devices are the perfect support for users’ needs in the field, right up to supervisory and management level. Base level: MBx devices for everyday…

Werma presents EvoSIGNAL – a modular system to quickly find the right signalling solution

Post author:Varga Elektronik
Post published:12. February 2019.
Post category:2019 / Werma

EvoSIGNAL – find the right signalling solution quickly and easily The purpose of signal devices is to alert, guide and protect. The type of optical and audible signalization depends on the relevant application and environment. Until now, selecting the appropriate signal device was often challenging and complex owing to the large number of variants available. The latest evolution from the Rietheim-based signalling technology specialist provides an answer to this problem. With Werma’s EvoSIGNAL, finding the right signal device is easier than ever: a clear, modular system optimally covers virtually all application fields. In just a few steps, potential customers are guided…

Cube67: Decentralization at its best

Post author:Varga Elektronik
Post published:30. January 2019.
Post category:2019 / Murrelektronik

The Cube system from Murrelektronik is a modular field bus system for on-machine installation concepts. It’s engineered flexibly to be the optimal solution for any application – meeting protection class IP20 through IP69K.Cube67 features great functionality, easy connections, a robust and compact design, fully molded modules, and multi-functional inputs and outputs. The modules can be installed right next to the sensors and actuators.Our one-cable-technology connects the modules to the bus node, transferring both data and power. Extensive diagnostics enable maximum transparency. The number of terminals in the control cabinet is reduced by moving field bus modules into the field, freeing…

KEL-DPZ round, grey

Post author:Varga Elektronik
Post published:21. January 2019.
Post category:2019 / icotek

Cable entry plates KEL-DPZ entry plates are designed to route and seal cables without connectors or fibre optics (from 1.5 mm to 22 mm in diameter) in limited space.The assembly of the KEL-DPZ round with cables or pneumatic hoses can be done quick and easy. Simply make a small hole in the thin membrane, push the cables through. The KEL-DPZ round provides strain relief and protection IP66 / IP68 / UL type 4X. The round versions of the KEL-DPZ series have a thread to fit in metric cut-outs from M25 to M63.Thus cut-outs for metric cable glands can be used.ST-B…

Photoelectric miniature sensor in place of optical fiber

Post author:Varga Elektronik
Post published:10. January 2019.
Post category:2019 / Contrinex

In some applications, installation space is so limited that there is no room for photoelectric sensors. So optical fibers are often used, despite their higher installation cost. Now Contrinex has developed a new photoelectric sensor which, due to its extremely small size, offers the ideal alternative. The sensor specialist has developed a 4 mm diameter or M5 threaded photoelectric sensor that is ideal for use in the robots, grippers, and small conveyors that must detect very small parts, typically in packaging, logistics, assembly and automation applications. All components of the miniature sensor, from the active light source with optics to…

Trafag revolutionises the measuring of highly dynamic pressure curves

Post author:Varga Elektronik
Post published:4. December 2018.
Post category:2018 / Trafag

Trafag has succeeded in unifying the highly dynamic response behavior of a test bench sensor and the extreme robustness of a mobile hydraulic pressure transmitter by combining thin-film-on-steel measuring cells and an ASIC developed in-house. The Trafag ASIC TX with an innovative parallel mixed-signal structure is the key to a response behavior at nearly unlimited speed. Download file - H70350