Supplement to the range Rontron-R-Juwelmounting diameter Ø 22.3 mmeasy to cleandegree of protection IP66/IP67/IP69khygienic approval acc. to GS-NV6 *suitable for different contact blockswith illumination and labelling optiondefined tactile pressure pointmembrane available in different colours * in preparation
Brush plates & brush strips for enclosures, server racks & machines icotek offers cable pass-through solutions with brush seal like brush plates and brush strips that are perfectly suitable for applications where no high sealing rate is required. The icotek brush seal solutions are meant for dust and dirt-proof cable pass-through of lines with or without preassembled connectors. The application areas for a brush based cable pass-through are very versatile, e.g. in an electrical enclosure, a server rack, on a machine wall or on raised floors. icotek brush plates and brush strips are a cost-effective solution for a professional cable management.…
The new Puls CP10.241-60 is a reliable, EN 50155-certified and highly efficient DC/DC converter for railway applications. Reliable, efficient and robust: 100% higher mains failure bridging time than required by railway standard EN 50155 (S2) Input voltage: DC 110V (-30%/+40%), 0.1s 66Vdc (-40%)Efficiency: 94.5%Operating temperature range: -40°C to +70°C without derating (+85°C for 10 min.)Weather-resistant: PC boards with a conformal coating and spring clamp terminalsMinimal noise generation: 100% convection-cooledFlexible use, rapid replacement: DIN rail mounting EN 50155-certified EN 50155 Electronic equipment used on rolling stock classified according to T3, TX, C2 and S2EN 61373 Shock and vibration tests classified according to Cat.1, Class BEN 50121-3-2 EMC requirementsEN 45545-2 Fire protection…
Maintenance doesn’t necessarily enjoy climbing on a shifting crane in wind and weather to replace a defective power supply unit. Murrelektronik’s new Emparro HD switched power supply is the solution to this problem! The module is engineered for extremely harsh ambient conditions. Emparro HD assures a reliable supply of electricity with a long service life. Emparro HD can be used in areas where power supply units may be installed in a control cabinet, but are still exposed to harsh environmental influences, for example on spreaders (lifting equipment for container handling), construction cranes and internal conveyor technology (intralogistics). Here the power…
The parametrisation happens with ease and can be done very quick by NFC smartphone app and a few finger taps. The set of parameters in combination with a comprehensive set of options make the electronic pressure switches versatile devices for demanding applications. The DPC 8380 contains a ceramic measuring cell whereas the measuring principle of the DPS 8381 is based on the proven thin film on steel measuring cell. The new electronic pressure switches with display, DPC 8380 and DPS 8381, are an ideal combination of pressure switch and transmitter with a pressure display. The parameterisation like switch points, output…
Viele Anlagen und Maschinen benötigen Sicherheitseinrichtungen, um während des Betriebs einen unbefugten Zutritt oder Zugriff zu verhindern. Ein einfaches Lichtgitter ist in vielen Fällen nicht ausreichend, denn Lärm, Hitze, Staub etc. dürfen z. B. aus Pressen, Roboter-Zellen oder Spritzgussanlagen nicht entweichen. Umgekehrt müssen Anlagen in der Lebensmittel- und Pharmaindustrie aus Hygienegründen vor eindringenden Fremdkörpern geschützt sein. Verschiedene Türen, Hauben oder Klappen helfen da weiter. Deren Stellung lässt sich nun mit einem magnetisch- oder RFID-kodierten, ECOLAB-zertifizierten Sicherheitssensor von Contrinex genau erkennen. Der Sensor arbeitet berührungslos, hat also keinen Verschleiß und damit lange Wartungsintervalle. Das magnetisch kodierte System (Typ 4 nach ISO…
With the new version of the compact, split cable entry system KEL-QUICK icotek releases a highly efficient and cost-effective possibility for pass-through of cables with or without connectors, conduits and pneumatic hoses. Since its original market launch in 2008, the KEL-QUICK series has been an integral part of the icotek product portfolio. Now the system has been completely redesigned, offering now an even higher stability, usability and a modern look. Furthermore, the KEL-QUICK is now also available as single row version. Wherever cables with or without connectors, conduits or pneumatic hoses have to be routed into machines, enclosures or control…
The MASI installation solution, the Murrelektronik AS-Interface system, allows the simple and inexpensive integration of IO signals into higher order control systems. MASI supports extremely flexible installation concepts in control cabinets and in the field, without the need to adhere to rigid topologies. Murrelektronik now presents a new and especially compact generation of MASI20 control cabinet modules with an innovative new design and an outstanding value for the money: They offer an especially affordable way to integrate signals into a control system.The MASI20 control cabinet modules are only 19mm wide, which saves space in the cabinet. They have been optimized…
A powerful 24V, 20A DIN rail power supply (PIC480.241C) complements the successful 120W and 240W PIANO versions Cost-oriented power supply: AC 200-240V input voltageHigh efficiency: 95.7% at 230V and full loadAbsolute reliability: MTBF SN 29500, IEC 61709 at 40°C of 482.000hRobust housing: High-grade, shock-resistant polycarbonate housingDC-OK relay contact: DC-OK signal can be reported via a floating relay contactExtraordinarily compact design: Width only 49mmOutput: 24-28V DC, 20-17.1A, 480WInput: AC 200-240V (± 10%)Size (WxHxD): 49 x 124 x 124mmWeight: 620g See more information about the PIC480.241C
Many of today’s industries and applications rely on photoelectric sensor technology. Contactless operation and long sensing ranges are ideal for numerous automation tasks, including in the packaging industry. With an integral IO-Link interface, Contrinex sensors bridge the gap between production machines and the digital world for the future industrial Internet of Things (IoT). Small, flexible and easy to integrate into different machine environments: all these requirements are met by the new photoelectric sensors of Contrinex’s short M18 series. This includes reflex, through-beam and diffuse sensors with or without background suppression. The small plastic housings with M18 diameter are only 33…
active illuminated emergency-stop with status indication acc. to EN ISO 13850:2015tactile pushbutton (35V / 1 NO)illuminateddefined tactile pressure pointvarious labelling optionslenses in different coloursfront rings silver-coloured or black
The new and universal Murrelektronik retaining clips for M8 and M12 round plug connectors make fastening extremely easy in plants and machines. The compact retaining clips made of robust plastic can be used side-by-side in any number in a modular fashion. The modular feature allows numerous connectors to be secured next to one another. They replace cable ties which get the job done but are not nearly as practical as retaining clips in terms of installation and maintenance: retaining clips allow connectors to be disconnected and reconnected manually in one step without tools. The retaining clips are available in two…
The Allgäu-based electronics specialist Steca announces the launch of its Steca Solarix PLI, an all-in-one hybrid inverter equipped to handle any conceivable energy situation. It is the first all-in-one solution from Steca that adapts quickly and intelligently to the respective energy supply form – and at an unbeatable price. Innovative electronics company Steca is launching its Solarix PLI, a genuine “all-around” talent in the inverter product line. This all-in-one hybrid inverter supplies consumers with 230V AC, charges the battery with an integrated MPPT charge controller and, at the same time, can connect to a generator or the existing public grid.This…
icotek is now offering cable entry systems combined with fire penetration seals for the railway industry. The intumescent (foaming) IFPS fire penetration seals are based on expandable graphite and significantly increase their volume at high temperatures. The result is a barrier that prevents the penetration of flames as well as the heat transfer from one room to another, e.g. to protect passengers and staff in rail vehicles against onboard fire incidents. The IFPS seals are mounted on the back side of the cable entry frame (side facing the potential fire source). The icotek cable entry components with mounted seals IPFS…
The CP10.241-M1 is a 240W DIN rail power supply with 2MOPP safety approval for medical applications according to IEC 60601-1, 3rd edition. Safety first IEC 60601-1, 3rd Edition: Requirements for electrical safety of patients and operators.2 MOPP (Means Of Patient Protection): A duplicate measure for patient protection.IEC 60601-1-2, 4th Edition: EMC tested for medical use. Fast and flexible installation Quick-connect spring-clamp terminals and flexible DIN rail mounting. 100% convection cooled Due to the high efficiency of 95.2% and the low power losses, less heat is generated in the system. This makes unreliable and noisy mechanical fans in the power supply…
When it comes to detecting transparent objects, the limits of conventional photoelectric sensors are soon apparent. Since clear glass or plastic absorb only a small amount of light, there is little difference between emitted and received light levels. As a result, switching signals may be unclear. Contamination by dust or moisture on the lens – unavoidable in many areas of application – can lead to counting errors. Until now, such problems have been mitigated through the use of complex algorithms in the controller or by constant fine adjustment. A new approach offers a solution. The Contrinex TRU-C23 photoelectric sensor is…
Murrelektronik’s Exact12 ATEX distribution boxes are ideal for use in potentially explosive atmospheres of zones 2 (gas) and 22 (dust), such as those in powder coating, painting facilities, wood processing plants, and flour mills. The robust distribution boxes with four or eight slots (having two signals each) meet the relevant requirements of the ATEX EU Directive 2014/34/EU and are approved in compliance with the standards EN 60079-0/-15/-31. The distribution boxes have been tested with regard to temperature, impact, heating, and seal. The trunk cable is tightly connected. It is made of high-quality and halogen-free PUR and is available in a…
WERMA is now able to offer an integrated I/O link in certain signal tower families. This feature offers the user many advantages and is the first internationally standardised IO link technology to enable communication with sensors and actuators. The two signal tower families KombiSIGN 40 and ClearSIGN not only provide a unique light picture but also ensure all-round 360° visibility thanks to the new OmniVIEW lens design. Both signal towers are compact and elegant in design and offer a high IP66 protection rating. Being very easy to assemble and install saves time and money, the high IP 66 protection rating allows…
By using the icotek cable entry plate KEL-DPZ 24 – you can insert up to 121 cables, hoses, optical fiber or cable strands with diameters 1.5 to 22 mm, strain relieved and sealed according to IP65/66/NEMA type 12 due to conical shape on back. The KEL-DPZ 24 has an area of only 36x112 mm - accordingly the cut-out dimensions of a 24-pole standard industrial connectors. The KEL-DPZ 24 can be screwed from the inside of the housing using M4 threaded bushings. Eight different types enable you to terminate most random combinations and variations of cables. The robust integrated frame was…
The Swiss based Trafag extends their product portfolio with electronic pressure switches based on the successful miniature pressure transmitters NAT 8252 and NAH 8254.The types vary in the accuracy of 0.5% and 0.3%. The new extraordinary robust and reliable miniature pressure switches are a very compact solution for countless applications with rough conditions like pressure peaks, high temperatures or shock and vibration. The heart of the new electronic pressure switches NAT 8252 and NAH 8254 is Trafags very robust and extraordinary stable thin-film-on-steel sensing element, which remains accurate and reliable even under rough conditions due to the triple overpressure safety…