Rolec inoCASE

Rolec has a proud history as a market leader in the design and development of new concepts in enclosures, command enclosures and suspension systems. The company founders Friedhelm and Matthias Rose are pioneers in enclosures technology. Providing our customers with fully matured designs of the highest quality and value is our prime objective.

Today Rolec manufactures an extensive range of modern high performance enclosures typically rated from IP 66 to IP 67. The range includes die cast and extruded aluminium enclosures, GRP polyester enclosures and ABS or polycarbonate plastic enclosures.

Naturally top products have to go together with top customer service. This includes the human factor – meaning a friendly environment – and first class service. The ready for installation customising of enclosures and command enclosures is our specialty: Be it drilling, milling, laser processing, engraving, powder coating, painting, printing, electrolytic polishing, hard-facing, the supply of face plates or membrane keyboards – ROLEC offers its customers fully finished enclosures ready for mounting the equipment.

  • Ingress protection:
    • IP 66 EN 60529
    • IP 67 optional
  • Dimensiones of inoCASE 4301 / A2 + 4404 / A4 Stainless steel:
    • 18 Versions
    • Dimensions L x W x H: 140 x 110 x 60 mm up to 430 x 300 x 120 mm
  • Dimensions inoCASEmini 4301 / A2 + 4404 / A4 Stainless steel:
    • 6 Versions
    • Dimensions L x W x H: 100 x 70 x 50 mm up to 200 x 90 x 60 mm
  • More information:
    • ROLEC inoCASE + inoCASEmini – Trend setting enclosures made of stainless steel V2A + V4A.
    • V2A: Space-saving single-channel lid and assembly fastening, outside the enclosure interior.
    • V4A: Assembly with separate fastening channels.
    • 4301/A2 is the world‘s most commonly used rustproof stainless steel material. Internationally, this quality predominantly bears the designation “304”, the material used in the standard version of the new ROLEC inoCASE enclosure.
    • 4404 / A4 internationally customarily designated “316L”, is even more resilient. This alloy contains molybdenum for the further enhancement of corrosion resistance, in particular to chloride and seawater.
    • Schutzart IP 66, optional IP 67
    • inoCASE A2/A4 enclosures obtain an aesthetically pleasing, high gloss surface that is even more resistant to corrosion due to alternative “electropolishing”.
  • Enclosures V2A
    • Stainless sheet steel, edged and welded
    • Alloy 1.4301 (AISI 304) V2A, sheet thickness 1.25mm
  • Enclosures V4A
    • Stainless sheet steel, edged and welded
    • Alloy 1.4404 (AISI 316L) V4A, sheet thickness 1.25mm
  • Screws
    • Stainless steel (V4A), captive, allen screw
  • Temperature range- 40°C up to + 80°C
  • Fastening
    • V2A: Space-saving single-channel lid and assembly fastening.
    • V4A: Assembly with separate fastening channels.
  • Ingress protection
    • IP 66 / EN 60529, optional IP 67
  • Components
    • inoCASEmini V2A:
      • Fastening thread M4 in the enclosure bottom
      • Earthing bolt M4 in the lid
    • inoCASE V2A/V4A/inoCASEminiV4A:
      • Fastening thread M5 in the enclosure bottom
      • Earthing bolt M5 in the lid
  • Gasket
    • Silicone flat gasket
  • Surface
    • Polished, grain: 320
    • Optional electropolished, special coating