Designed for universal applications in electrical engineering and industrial electronics, profiPLUS is compatible with all display/control panels from leading manufacturers. The ergonomic, stable ball joints form the turn and crucial point of the system.
These include right angle connectors, wall-, intermediate- and top joints, which build a solid connection between the carrying arm and if applicable a foot.
The cable routing is made “invisible” by special wrappings in all turn- and tilt couplings. The uncluttered and elegant appearance plays less a crucial role as the fact, that the cables are optimal protected from outside influences. The dimensions of all components are generously sized for the cables and connectors. This also simplifies the connection of the interfaces.
Thanks to a patent-pending solution for quick adjustment the carrying arm is not only very easy to move in the desired position to operate the system for control, it also locks with only one adjustment screw.
ProfiPLUS 70 offers more room for further control lines than the smaller profiPLUS 50 system. At the same time, the system’s bearing strength increases significantly. In addition to the many advantages of profiPLUS 50, such as couplings with pre-mounted support profiles, continuous equipotential bondings, integrated cable protectors, and much more, an additional reducer adapter for connecting to the profiPLUS 50 system offers the possibility of connecting to the panels of leading manufacturers such as Siemens, B&R, CRE Rösler and Beckhoff.
|Principle:||Economic, compact and elegant designer suspension arm system for medium to heavy loads|
|Additional info:||Possible to connect control enclosures from leading manufacturers such as Siemens, Beckhoff, B&R, CRE Rösler and Rolec.|
The spacious cable routing offers an optimum connection with all interfaces, sufficient space is available for a range of cables and connectors.
Patented Rolec solution for alignment of the complete system in a horizontal direction through a single set screw!Continuous equipotential bonding, DIN VDE 0113 / EN 60204-1 / IEC 204-1.
Kontinuirano ekvipotencijalno spajanje, DIN VDE 0113 / EN 60204-1 / IEC 204-1
All couplings are equipped with pre-fitted support profile as standard.
Integrated cable protection in all system parts.
Optional: Signal light adapters for joint and elbow
|Material/coating:||Die-cast aluminium alloy, powder coated RAL 7035 light grey|
Optional: Special colours
Support profiles: Extruded aluminium profile, anodised silver, preformed fastening thread
Optional: Anodised special colours or powder coated
Covers: Plastic (POM), RAL 7015 anthracite grey
Bellows: PVC-P, RAL 7016 anthracite grey, temperature resistance: -30°C to +70°C
|Gasket:||Chloroprene O-ring gasket (CR), temperature resistance: -30°C to +90°C|
|Cable routing:||Suitable for HDMI, patch cables, DVI, USB, cold-device plugs etc.|
|Ingress protection:||IP 54 / EN 60529|