Cable entry systems Archives – Varga Elektronik

New brush strips from icotek for the cable management

Post author:Varga Elektronik
Post published:5. April 2024.
Post category:2024 icotek

The new icotek brush strips are a practical solution for organising network cables in 10 inch (BES 10) and 19 inch (BES 19) switch cabinets from various manufacturers. They are characterised by their tool-free assembly and disassembly thanks to the integrated spring locks. To install or remove the brush strips, simply release the spring locks on both sides. The brush strips enable cables to be easily routed through, obscuring the view of the cables inside the switch cabinet and creating an organised appearance. The brush strips protect against the ingress of dust and dirt and, at the same time, ensure air circulation. These features increase the reliability and longevity of the network environment.…

KEL centrally split cable entry frames

Post author:Varga Elektronik
Post published:7. December 2022.
Post category:2022 icotek

for cables with connectors / IP54 / UL Type 12 The classic KEL is a centrally split cable entry system for routing cables with connectors, providing an IP54 / up to UL Type 12 rating. The slit KT grommet matching the cable diameter is placed around the cable and inserted into the cable entry frame. The split cable entry frames KEL match exactly the cut-out dimensions of 10-, 16- and 24-pin standard industrial connectors. Either a cut-out of 36 mm or 46 mm in height can be chosen depending on the cables being routed. The size KEL-B matches the cut-out dimensions of 46 × 46 mm measuring instruments. Based on the frame sizes…

Cable entry plates KEL-DPZ 16

Post author:Varga Elektronik
Post published:2. May 2019.
Post category:2019 icotek

icotek KEL-DPZ 16 cable entry plates are designed to route and seal up to 34 cables without connectors or fibre optics (from 1.5 mm to 16.2 mm in diameter) in limited space.The KEL-DPZ products are a cost and time saving alternative to traditional cable glands.The assembly of the cable entry KEL-DPZ 16 with cables or pneumatic hoses can be done quick and easy. Simply make a small hole in the thin membrane, push the cables through. The KEL-DPZ 16 provides strain relief and protection up to IP66.The size KEL-DPZ 16 matches exactly the cut-out dimensions of 16-pin standard industrial connectors.ST-B Plugs can be used for sealing pierced membranes if cables have been removed.…

KEL-DPZ round, grey

Post author:Varga Elektronik
Post published:21. January 2019.
Post category:2019 icotek

Cable entry plates KEL-DPZ entry plates are designed to route and seal cables without connectors or fibre optics (from 1.5 mm to 22 mm in diameter) in limited space.The assembly of the KEL-DPZ round with cables or pneumatic hoses can be done quick and easy. Simply make a small hole in the thin membrane, push the cables through. The KEL-DPZ round provides strain relief and protection IP66 / IP68 / UL type 4X. The round versions of the KEL-DPZ series have a thread to fit in metric cut-outs from M25 to M63.Thus cut-outs for metric cable glands can be used.ST-B Plugs can be used for sealing pierced membranes if cables have been removed.…

Service box for QT cable grommets

Post author:Varga Elektronik
Post published:18. July 2018.
Post category:2018 icotek

The QT ServiceBox is perfect for installations and service calls. It ensures your QT grommetsare readily available. Content* : Cable grommets:210× QT for cables 1 - 15 mm10× QTB blank grommetsCable entry components:5× KEL-QTA 50 A cable entry plates1× KEL-QTA 32 A cable entry plate1× KEL-QTA 24|2-DP 18 A cable entry plate1× KEL-QTA 10|1-DP 18 A cable entry plate1× KEL-QUICK 24|10 cable entry frame1× QVT 25 split cable gland1× QVT-CLICK 32 split cable glandAccessories:1× Cable template *Subject to alterations Specifications: Material: ElastomerColor: grey (similar RAL 7035)Flame class: UL94-V0, self-extinguishingTemperature (°C): -40 - +90 °CProperties: Halogen free, Silicone free Convenient - everything available right away! Order No. 88005

Setting new standards: The split KVT-ER cable gland

Post author:Varga Elektronik
Post published:7. May 2018.
Post category:2018 icotek

IP66/IP68 cable gland for cables with & without connectors Split cable gland KVT-ER sets new standards in connectorised cable routing By introducing the all-new split cable gland KVT-ER icotek is setting new standards in connectorised cable entry. The KVT-ER cable gland is a liquid and dust proof (IP66/IP68), rugged, easy-to-install and comparatively very cost-effective solution for routing, sealing and strain relief of cables with or without preassembled connectors. Cable routing, sealing & strain relief KVT-ER is a split cable gland for routing and sealing cables with connectors or complete cable harnesses. But also electric, pneumatic or hydraulic lines without terminals or connectors as well as corrugated conduits can be easily routed (e.g. into…

Cable pass-through with brush seal

Post author:Varga Elektronik
Post published:22. January 2018.
Post category:2018 icotek

Brush plates & brush strips for enclosures, server racks & machines icotek offers cable pass-through solutions with brush seal like brush plates and brush strips that are perfectly suitable for applications where no high sealing rate is required. The icotek brush seal solutions are meant for dust and dirt-proof cable pass-through of lines with or without preassembled connectors. The application areas for a brush based cable pass-through are very versatile, e.g. in an electrical enclosure, a server rack, on a machine wall or on raised floors. icotek brush plates and brush strips are a cost-effective solution for a professional cable management. The brush seal solutions allow reduced airflow while filtering out dust and larger…

New Cable Entry System for Cables With Connectors – Tool-Free Assembled & Cost-Effective!

Post author:Varga Elektronik
Post published:3. November 2017.
Post category:2017 icotek

With the new version of the compact, split cable entry system KEL-QUICK icotek releases a highly efficient and cost-effective possibility for pass-through of cables with or without connectors, conduits and pneumatic hoses. Since its original market launch in 2008, the KEL-QUICK series has been an integral part of the icotek product portfolio. Now the system has been completely redesigned, offering now an even higher stability, usability and a modern look. Furthermore, the KEL-QUICK is now also available as single row version. Wherever cables with or without connectors, conduits or pneumatic hoses have to be routed into machines, enclosures or control panels and sealed with IP54, the cable entry system KEL-QUICK is an outstanding…

New fire penetration seals for cable entry systems

Post author:Varga Elektronik
Post published:5. September 2017.
Post category:2017 icotek

icotek is now offering cable entry systems combined with fire penetration seals for the railway industry. The intumescent (foaming) IFPS fire penetration seals are based on expandable graphite and significantly increase their volume at high temperatures. The result is a barrier that prevents the penetration of flames as well as the heat transfer from one room to another, e.g. to protect passengers and staff in rail vehicles against onboard fire incidents. The IFPS seals are mounted on the back side of the cable entry frame (side facing the potential fire source). The icotek cable entry components with mounted seals IPFS are certified with fire barrier classifications E45 and EI30 when mounted on 18…

KEL-DPZ 24 | Your space, time and cost saver

Post author:Varga Elektronik
Post published:30. July 2017.
Post category:2017 icotek

By using the icotek cable entry plate KEL-DPZ 24 – you can insert up to 121 cables, hoses, optical fiber or cable strands with diameters 1.5 to 22 mm, strain relieved and sealed according to IP65/66/NEMA type 12 due to conical shape on back. The KEL-DPZ 24 has an area of only 36x112 mm - accordingly the cut-out dimensions of a 24-pole standard industrial connectors. The KEL-DPZ 24 can be screwed from the inside of the housing using M4 threaded bushings. Eight different types enable you to terminate most random combinations and variations of cables. The robust integrated frame was enlarged from 10 to 14 mm to provide a better gripping strength. KEL-DPZ…

KEL-BES round

Post author:Varga Elektronik
Post published:28. April 2017.
Post category:2017 icotek

Split round brush frame for cable entry Cable entry frames KEL-BES for routing cables into network cabinets, control boxes and control cabinets. KEL-BES is also an ideal solution for entry and exit of cables that are routed inside raised floors, e.g. in computer centres.For round metric cut-outs M50 icotek now offers the split KEL-BES 50. It can be either directly snapped into the cut-out or screwed with a locknut. Advantages Fast and easy assemblyVersatile in useThermal protection, separation of cold and warm airAllows reduced airflow while filtering out dust, hair and larger particulate matterVisual screeningProtects cables against wear due to sharp edges of the cutout Specifications Material: PolycarbonateMaterial brushes: PolyamideColour: black (RAL 9005)Flame…

Pluggable cable entry plate… KEL-QTA

Post author:Varga Elektronik
Post published:4. April 2016.
Post category:2016 icotek

For a quick and tool-free installation of multi-conductor and factory terminated cables the cable entry plate KEL-QTA is perfect.The KEL-QTA combines the split QT grommets with our membrane version of the icotek cable entry plates within a single unit. Up to 34 multi-conductor and factory terminated cables can be installed by using multiple grommets. The KEL-QTA is available in the sizes: Size 10-pole standard industrial connectors Size 24-pole standard industrial connectors Quadric in 46 x 46 mm In metric sizes M32 and M50. Easy, tool-free assembly - watch our assembly video on youtube. https://youtu.be/0nlKXJ9t2Uk

Cable entry KEL-DPU | universal, robust & hygienic

Post author:Varga Elektronik
Post published:27. January 2016.
Post category:2016 icotek

With the new universal cable entry plate KEL-DPU by icotek standard cables, wires, optical fibres or pneumatic hoses can be quickly and safely routed into electrical enclosures, housings or machines and additionally strain relieved. High stability, tightness and strain relief The cable entry plate KEL-DPU is especially characterised by its very robust hard frame made of polypropylene which is completely moulded with elastomer. This results in a high ingress protection and stability as well as in a high strain relief level of the routed cables.Cables passing the membranes at the plate front are sealed a second time through conical cable sleeves at the back of the KEL-DPU. This unique grommet design provides sealing…

Icotek KEL-U cable entry frames IP54

Post author:Varga Elektronik
Post published:2. December 2014.
Post category:2014 icotek

Split cable entry system for routeing pre-terminated cables providing a protection class of IP54. Routeing, sealing and providing strain relief according to EN 50262 / EN 62444 for cable diameters from 2 to 34 mm. The new cable entry system is easy to install. Cable inserts are placed into compartments and are securely fixed to the frame during assembly. Once the lid is affixed to the base frame, it is compressed and tightly sealed. The KEL-U frames exactly match the cut-out dimensions for 24-, 16- and 10-pole standard industrial connectors. The KEL-U-B matches cut-out dimensions of 46×46 mm measuring instruments. Advantages Very easy assembly Warranty on pre-terminated cables remains Retrofitting and maintenance can…