KEL-DPZ cable entry plates

KEL-DPZ cable entry plates are designed to route and seal a large number cables without connectors, hoses or fibre optics (from 1.5 mm to 22 mm in diameter) in limited space.

Five new configurations have been added to the KEL-DPZ-KX/KL cable entry plate, designed for Rittal KX and KL enclosures.

Create a cable entry in no time!

By mounting the KEL-DPZ-KX/KL cable entry plate on the Rittal KX or KL enclosure instead of the Rittal flange plate, a cable entry for a large number of cables with different diameters can be created in a very short time.

Assembly

For assembly, the required membrane has to be pierced and the cable fed through. Membranes that are no longer needed can be sealed again with ST-B plugs.

• High cable density: Up to 72 cables can be routed
• High flexibility: For cables with a diameter of 3.2 to 26 mm
• Fast assembly: Ready-to-install solution for Rittal KX or KL enclosures, or for universal use (cut-out size 192 × 62 mm)
• Certified protection: IP65
• Automatic strain relief for the cable

---

Why are icotek cable entry plates a better alternative to cable glands?

Key advantages of icotek cable entry plates:

• Higher packing density with less space requirement
• Faster assembly and fitting, as only one cut-out is required for several cables